Question about Pocket Health & Beauty

Open Question

My Didi weigh pocket scale reads error when calibrating

Posted by Jarrod Reed on

Ad

5 Related Answers

Anonymous

SOURCE: CALIBRATION OF POCKET SCALE

Press and hold 'CAL' key to calibrate the scale. www.luxford.cn

Posted on Dec 14, 2007

Ad
ptooshar

TUSHAR PANDYA

  • 20 Answers

SOURCE: error code 111

you may pleased to check and resolder the connection of sensor

Posted on Dec 02, 2008

Ad

Anonymous

  • 463 Answers

SOURCE: My Scale stoped weighing me, now it reads 1-ld .

The sensor has been worn out or has been pushed past it's weight limit. When you get on it, it pushed the sensor past the point of working... When she gets on it, no problemo...

Posted on Mar 16, 2009

Anonymous

  • 279 Answers

SOURCE: New Scale out of box will not weigh correctly

Take a 5 pound bag of sugar, flour or what have you. Put it on the scale. If it is off, turn the scale so that you can check every possible place for an adjustment. Adjust and go for it!!! Good luck...Lee

Posted on Jan 17, 2010

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: Tanita BD-590 calibration

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to troubleshoot a weighmax pocket digital scale wsm650 it wasnt weighing correctly i calibrated it d ll doesnt work right. When i turn it on it reads 8888 then says unst and shuts off
are you sure the batteries are good. double check it again with known good batteries.

Nov 02, 2017 | Pocket Health & Beauty

1 Answer

My accura8 scale wont show the calibration mode
What model? Could be the battery need to be changed.

at
http://www.tobaccogeneral.com/accur8-355-mnf.htm
tobacco is selling out their accura8

Sep 29, 2017 | American Weigh Scales Aws Chrome 1kg...

1 Answer

Is there a way to calibrate without 3-50 pound weights?
water weighs 10lb to the gallon ( engilish measurement-calculate amount for us gallon)
so get your self a jug and place it on the scales empty adjust the scales to zero
fill the jug with a measured amount of water (example 1 pint will weigh 1.25lbs
then set the scales to the reading of 1.25lbs
to check the scales accuracy you can add extra water to the jug (say 4 pints ) and the scale should read 5lb

Jul 25, 2015 | Office Equipment & Supplies

1 Answer

I have a supreme weigh sw02 digital pocket scale i need to calibrate and need help
500ml 0f water is exactly 500g, measure that volume and put it in freezer bag and use as calibration weight, or if you have friend with scales - borrow from him scale weights.

if you use water - accuracy of the scale will not be absolute, it may vary few g either way.

another way - go to shop and buy 500g block of butter - put it on the scale in the shop - remove or add as you need till you have exact 500g, shop scales are accurate on that weight within 2g

do not forget to vote if you find this answer useful...

Jan 02, 2015 | Health & Beauty

1 Answer

How can you fix error on screen can it be reset
It often just needs recalibrating. Try turning the scale on while holding the mode/tare button with nothing on the scale. Then press the tare button again. It should show a calibration weight which you should put onto the scale. Then it automatically calibrates.

Nov 30, 2014 | DigiWeigh 100 X 0.01 Gram Digital Jewelry...

1 Answer

I have a DigitZ DZ3-600 and when I turn it on the word FULL in the display screen . What can I do to clear this and start using it?
My search is telling me that this is a scale. Is this correct? If so - this is the manual. \'FULL\' is not an error, but this is the correct model. If this is not a scale, please write again and provide more information:



The manual is short and PASTED after link to same here:



http://digitzscales.com/index.php?option=com_content&view=frontpage



Digitz DZ3-600 Manual



I. Operation

1. Place the scale on a flat, level surface and press the ON/OFF key to turn the scale on.

2. Once the start-up process completes and the scale goes to zero you are ready to weigh.

3. Place the quantity to be weighed onto the weighing platform.

4. Wait a couple seconds for the display to stabilize before taking a weight reading.



II. Changing the Unit of Measure

1. Press the MODE key to change the scales displayed unit of measure.

2. If the scale is turned off then back on, it will default to the last unit used.

• DZ3-100 Units: g (gram) oz (ounce) ct (carat) gn (grain)

• DZ3-600 Units: g (gram) oz (ounce) ozt (troy ounce) dwt (pennyweight)



III. Using the Tare Feature

You can use this scale\'s tare feature to subtract the weight of an empty container or vessel for net weight determination. NOTE: The weight of the container will subtract from the available capacity.

1. Place the empty container or vessel on the weighing platform.

2. Press the TARE key once. The display will then reset to zero. If the container is removed, it\'s weight will be displayed as a negative number.

3. You may now fill the container with the quantity to be weighed. The display will show the net weight of the contents.

4. To return to normal weight display (gross weight), remove any items from the weighing platform and

press the TARE key again to re-zero the scale.



IV. Calibration / Adjustment

1. Turn the scale on by pressing the ON/OFF key.

2. Wait for the display to show "0.0g" or "0.00g" then press and hold the MODE key until the display shows "CAL", then release.

3. Press the MODE key again. The display will flash "CAL" followed by the required calibration weight.

4. Place the required calibration weight on the center of the platform. The display will show "PASS" then return to normal weighing mode. Calibration is complete! You may now turn the scale off.



V. Error Codes

1. OUTZ - Zero range has shifted. Perform calibration adjustment. If the problem persists, the load cell may be permanently damaged due to overloading.



2. 88888 - Maximum capacity exceeded. Remove the extra weight to avoid damaging the load cell.



3. L - Batteries are low. Replace the batteries.



VI. Specifications

DZ3-100 DZ3-600

Max. Capacity 100g 600g

Readability 0.01g 0.1g

Min. Weight 0.03g 0.2g

Power Two (2) AAA Batteries

Dimensions 3.0 x 5.0 x 0.8 in.

Platform Dimensions 2.5 x 3.0 in.



For warranty and support, please email

[email protected]

Aug 20, 2014 | Office Equipment & Supplies

2 Answers

I have fuzion rogue -650 digital pocket scales but someone played with them and calibrated it wrong so now is not weighing right. How do I fix this problem without calibration weights?
You can use the weight of coins to calibrate the scale. Since I don't know where you are here are some examples.
use the newest cleanest ones you can as they do wear and change slightly

http://www.usmint.gov/about_the_mint/?action=coin_specifications
http://www.royalmint.com/discover/uk-coins/coin-design-and-specifications

Jul 18, 2014 | Health & Beauty

1 Answer

Operating instructions for Volt -100 pocket scale
If you don't have the measured weights that sometimes come with scales or can be purchased individually, I'd recommend using a United States nickel/5 cent coin. They are supposedly an exact 5 g's each, and a Volt-100 scale requires 100 g's for recalibration. Therefore, you can recalibrate your scale using 20 nickels. I also use a Volt-100 and so far this has worked for me exactly; the most it's ever been off is .02 g, which is basically nothing.
What you do is remove your batteries, (I'd replace them with brand new ones if you have the option) then place the scale on a completely smooth, perfectly level, flat surface. Power the scale on, make sure it is reading 0.00, hold the M (mode) button until CAL comes on the screen, release the button for a quick second, then press it again one more time (quickly, don't hold this time), and then wait until "100.00 g" is flashing on the screen. Then you're going to place your 20 nickels on the scale as smoothly and with as little jostling or movement as possible. After a moment, the screen should read out "PASS". You then power the scale off (don't weigh anything before turning it off as it can possibly adjust the calibration you just set or weigh out heavily or light) and to test out your newly calibrated scale, turn it back on and weigh one nickel. It should be exactly 5 g's, with no more than a .02 digression in either direction if done properly. Good luck!

Jul 07, 2012 | DigiWeigh 100 X 0.01 Gram Digital Jewelry...

2 Answers

How to calibrate 1000xr us-magnum digital scale
magnum 1000xr pocket scales turns on calibrates goes to different modes but wont show the weight when object placed on the scale,a lock appears in top left of window, is scales broke or do i have to make lock symble dissappear?

May 28, 2011 | Kitchen Appliances - Others

1 Answer

When I weigh the first time each morning, the weight displayed is almost exatly 4 lbs heavier than subsequent weighs. The lighter subsequent weight readings are very consistent and closely match the...
I am having exactly the same problem! I am using a WW scale. I am hoping the lesser weights are the accurate ones!

Oct 28, 2010 | Health & Beauty

Not finding what you are looking for?

View Most Popular

Health & Beauty

Related Question

How to troubleshoot a weighmax pocket digital scale wsm650 it wasnt weighing correctly i calibrated it d ll doesnt work right. When i turn it on it reads 8888 then says unst and shuts off

  • Pocket Health & Beauty

Open Questions:

0 Answers

Can anyone help me please?? When turning my scales on it comes up “ursn over” and won’t do anything else does anyone know how to fix this It’s a Infiniti pocket scale RJ-50

Dec 05, 2018 | Pocket Health & Beauty

0 Answers

my pocket scales reads - oue2 when i turn it on .what does this mean

Nov 09, 2018 | Pocket Health & Beauty

0 Answers

My accur8 pocket scale is saying full how do i fix this

Mar 29, 2018 | Pocket Health & Beauty

Health & Beauty Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

2 Answers
My MS-600 digital pocket scale says full and will not do any thing else can you help fix it

Pocket Health & Beauty

1 Answer
How to troubleshoot a weighmax pocket digital scale wsm650 it wasnt weighing correctly i calibrated it d ll doesnt work right. When i turn it on it reads 8888 then says unst and shuts off

Pocket Health & Beauty

2 Answers
What does it mean when my us-magnum 1000xr pocket scale says rCAL and keeps flashing 500.0

Pocket Health & Beauty

1 Answer
How do I fix my pocket scale that says 24C02 and then shuts back off

Pocket Health & Beauty

1 Answer
My insten pocket digital scale turns on to 88888 and then starts running random numbers and even after I hit tare it doesn't stop

Pocket Health & Beauty

Top Pocket Health & Beauty Experts

Brad Brown

Level 3 Expert

18596 Answers

jws1013

Level 3 Expert

1708 Answers

Dariusz Zalewski
Dariusz Zalewski

Level 3 Expert

1072 Answers

Are you a Pocket Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...