At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Im looking for a power supply to plug my PL-Z94 into....
That is a Pioneer Turntable, not a computer! You need a standard 12V DC power supply with the centre pin negative or the rest of the unit it is powered with.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most likely cause is that the belt has been fitted in the wrong position.
If that is not the case, then you can look underneath the turntable at the base and see if you can see a speed pre-set (sometimes there are two, one for each speed). Turning this will adjust the speed. You might need a small screwdriver. Sometimes the hole for these pre-sets are covered with a sticker. If you find it, to get the speed right will be a case of trial and error. I find the best way to do this operation is to mount the turntable on a chair which has no seat in it. Thus meaning you can get to the underside while the disc plays.
you should have a cord for the power supply that goes into the printer from the power supply it plugs into the supply then into the printer, if you don't have it take it back to where you bought it and tell them it's missing. Hope this helps and thanks for using fix-ya.
a mobile cb radio like the cobra 29 requires 12V DC, to plug the radio into the wall you need a Power Supply. A small 5 amp power supply will help you. Their is no plug that goes Directly from a Mobile CB rado into a wall. You will need to plug a power supply into the wall, Then take the power chord (red and black with 3 prong [o oo] and connect red to red on the power supply and black to black on the power supply. Unfortunatly a cheap power supply will be $50+ check your local radioshack
I HAD THE SAME PROBLEM AND I CALLED PIONEER AND IT TURNED OUT TO BE A POWER SUPPLY, PIONEER IS FIXING SOME MODELS WITH THE DEFECTIVE POWER SUPPLIES FOR FREE LOOK ON THEIR WEBSITE
×