What is error code EE? - Haier Refrigerators

If the refrigerator or freezer displays error code, request a technician to check, please call the service
Different series display different error codes.
The error codes for the refrigerator: F1, F2. F3, F4, F5, F6, F7, EO, E1, E2, E6, Er, Ed, an so on
The error codes for the wine cellar: F1, F2. F3, F4, F5, H1. H2, A1, A2, E1, E2, EE, HH, LL, and so on
Notice: If you power off then power on, maybe the error code disappear, but it will display again after a few hours.

Dual Fuel Range Error Code 07 ' FAQ ' Sub-Zero and Wolf

www.subzero-wolf.com/.../dual-fuel-range-error-code-07

Sub?ZeroCore Issue: Dual Fuel Range error code 7; ERR 07 displays on Dual Fuel; Error 07 on control panel of Dual Fuel ... Convection Steam Oven Error Code E75.

L Series Built-In Oven Error Code COMM ERR ' FAQ ' Sub ...

www.subzero-wolf.com/.../l-series-built-in-oven-error-code-co...

Sub?ZeroCOMM ERR displayed on an L Series Built-In Oven indicates a communication error.Reset the unit's power at the circuit breaker. Turn the unit back on to see if ...

WWD30 Warming Drawer Error Code 40 - Sub-Zero and Wolf

www.subzero-wolf.com/.../wwd30-warming-drawer-error-cod...

Sub?ZeroError 40 on a Wolf Warming Drawer. Steps to Verify Issue: With error 40 on WWD30 warming drawer try the following before calling service: ... x. PF Error Code on Warming Drawer ... Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. ... Wolf Cooking.

Wolf DF304 beeping after turning off the oven - The Kitchen ...

appliantology.org > ... > The Kitchen Appliance Repair Forum

This is most likely a sensor problem, unplugging your refrigerator for 1 minute and plugging it back should reset the board and clear this error code.

Hello Omie;

My name is Peter. I am a retired field service refrigeration technician.
Bottom drawer & bottom freezers are nightmares. Next time but a side by side or top freezer.
Ok, lets fix this. Using a hair dryer defrost all of the ice around the door. Next, you have a rack and pinion assembly that the drawer rides on. This also is iced up. Defrost the rack & pinion.
When you close the drawer you will probably have a gap on one side. This is caused from the ice build up and the rack and pinion jumping a tooth.
Where the side is that has the gap, you must lift the drawer and jerk hard towards the gap to jump a rack and pinion on the opposite side. You may have to repeat this. It is a strong arm operation.

the best suggestion is to contact the manufacturer at: (877)337-3639.

try to order through appliancezone.com or maybe ebay...

EE mean that the cable between the mainboard and the display have a problem. I think it doesn't affect the coldness of the unit.

There are an explanation manual behind the back bottom panel.

In my case soon after having reset this error, the cable melted and took in fire.

How to check:
There is a black panel under the two drawer with 2 screws (left/right). The board is behind, the cable which melted in my case was a grey one connected to a black one.

unplug unit wait a few secounds then plug it back in and try it may reset.

EE
Remove your washer from the power source if you see an "EE" error code, where the first E is missing the top part of the letter. Your washing machine has a serious malfunction, and you must contact a technician.

A bit odd that as error code EE does not exist for washing machines, it's a refrigeration error code. Unless of course part of the display (led) has been damaged and the code isn't displayed properly.

Hope helps.