CVA 4075. How can I clear F10 and F17 codes? - Miele Coffee Makers & Espresso Machines

What program have you established in Settings?

PHONE

Please advice as to the make and model of this camera. Thank you.

http://mielerepaircenter.com/miele-coffee-maker-repair

I have a Miele CVA 4085 built-in coffee maker which had a similar problem to this and other problems where it gets locked into a state and won't let you do anything else. I my case it says Cleaning and it demands you empty the drip tray even though it is empty. In my case it was at the end of a cleaning cycle and refused to go on. Cutting power and restarting always had it return to the same state: Cleaning, empty drip tray.

I cleaned the contacts on the drip tray and at the back using the nail file, still nothing. Then I found a post on how to get into the programming menu, which on the CVA 4085 is this:
Open the door and switch off the power with the rocker switch on the top left.Wait at least 5 seconds.
Switch the rocker on then VERY QUICKLY close the door and hold the clear button for 5 seconds.
With your other finger touch the ON button then pull both fingers away at the same time.
Do 5 rapid presses of the clear button but hold your finger down on the last press and keep holding it down until the programming menu comes up.
Do not press the reset button that you see at the top of the menu (unless your German is quite good or you have access to Google Translate).
Scroll down until you find the reset cleaning button and select it. Once you have confirmed you can then exit programming mode by powering off.
It took me quite a while to get to this point, but at least I can now recognize the German word for drip tray.

Hello Loriktarrant,

I understand the your Meile CVA4075 is showing you an F73 code. This code means that the brew unit needs to be cleaned. Here is a link to the owners manual on page 40 it shows you how to manually remove and clean the brew unit. The other issue you are having with the milk and coffe not being hot enough could be to the machine needing descaled.

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man enter the numbers in the box and click download.

Thank you for choosing FixYa.com

Justin

https://www.youtube.com/watch?v=wjprksHlK38

Turn your machine off. Close the door. Depress <clear>, holding it down, press <on/off> then let go of both. Then press <clear> 3 times. On 3rd time, hold it until Service menu appears. Select <brew unit> then press left arrow to turn from <off> to <on>. Then press right arrow by <select> This will turn your brew unit drive to the correct position and you should be able to get your brew unit in/out and your waste container back in. Make sure to turn your machine off/on again to get out of Service Menu. I have a picture of how the wire needs to be inserted to get that back on. It's definitely not intuitive, but send another note with your email address and I can send the pics.

You need a new Elektronik. The one in the back of the Coffee maschine has to be changed. There is a technical Problem in the Clock Module.

Greeteings ....

Mr. Cool