Where is the factory reset button on a dmr-ez485v vcr/dvd recorder.

hope this helps... http://www.online-convert.com/

1.The DVD Drive makes two-three times noise than stop spin the media CD
or DVD.
-Bad DVDRW Drive.
2 The drive does spin CD-DVD but doesn't load.
-. Bad NDMi PCB VEP79180 or VJB79180
3. Drive spinning but don't load CD or DVD
More chance Bad Drive or Problem with drive PCB.
Open top Cover of drive, open tray,
close tray. If laser flashed but doesn't play CD-DVD more chance bad drive PCB
Check: avsystemparts.com

Insert a lens cleaning disc into it and let it play. If this do not help you, the optical pickup unit to your playder is faulty, and should be replaced.

Hit reset button, unplug it or swear at it. If you looked up online find more problems listed on unit then ways to correct problems. Does have nice play back. I bought a DVD maintenance kit seams to help some issues. good luvk

I just saw the date on this message and realize that it was awhile ago. I assume that you have dealt with it by now... So for others who are trying to fix their DVD player:

I have a DMR-EZ485V DVD player and just started getting the error message "No Read." I couldn't find an answer on the internet and finally called Panasonic's customer service, (there is no charge 1.800.211.7262). Since it says "No Read" to everything--store-bought DVDs, burned DVDs, CDs; AND when there is nothing in there (it acts like it is trying to read when the tray is empty), the customer service rep thinks that I am having a lens issue. It either needs to be cleaned (can pick-up a product at Best Buy or Radio Shack) or, if that doesn't work, the lens needs to be replaced.

Panasonic website under FAQs. Using code shown on dvd readout,
such as RC2, press 2 & enter or ok, hold for 2 seconds, and machine
will reset connection between remote & dvd recorder. So stupidly simple it works.

Replace the CR14 changer mechanism. If it is under a year old it is covered by mfc warr. Seek auth Panasonic servicer.

I connected my Panasonic DMR EZ485V DVD Recorder in 240 VA, and after to broke (burned) the safety fuse. Do you know what is the value of the fuse??? I need replace this, but I don´t know the specification. I know my Panasonic DMR EZ485V DVD Recorder work 120 VA. Best regard

May be 4 to 6 screws holding on the cover. Remove the cover to access the disc.

Adjust pictures sequence before burning? usually they can be sorted by file name, date photo taken, date modified.

Some slideshow software also allows you to drag pictures to any position in sequence you want, say Wondershare Movie Story I am using.