Sunbeam 2366 stand mixer -- Front view: mixer-0-small.JPG --
-- image of the "beater clip": mixer-1-small.JPG -- notice the wear on the plastic clip --
-- image of the "modified" beater: mixer-2-small.JPG - I took a paper clip an wound very tightly to the smallest diameter (notice it covers the entire section to prevent slippage) and then put one wrap around the "top knot" to increase diameter --
-- image of the back of the front cover: mixer-3-small.JPG - notice the broken clip at the top. I used a wide scrapper blade to separate the cover from the main body.
----
The mixer is the Heritage Series Model 2347
×