Any one know, how to Factory reset NIKAI CURVED 32inch TV

If your Harwa 32-inch smart TV only shows the startup screen and the remote doesn't work, try these steps:

1. Check remote batteries.
2. Power cycle the TV.
3. Reset the TV to factory settings.
4. Update TV firmware. If issues persist, consult Harwa support or consider professional assistance.

You will have to set it up from scratch because you have deleted it previous remembered settings.

Choose the signal input HDMI - Cable - Aerial etc.

Connect to WiFi.

https://www.google.com/search?q=ntv4000csled+setup

I can't find a manual as it appears to be sold in Oman.
..

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
https://homenol.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done./

Do a factory reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

1st unplug your TV.After 5 minutes turn it on and see if it prompts you to set up the TV with a setup wizard of some sort. This will probably include an auto scan of channels. If that doesn't work explore all options in the menu to see if there is a reset of some sort. And if all else fails, read the users manual.

Have you tried going into the menu and resetting to factory default.? If so how old is the TV?

Do a factory reset to this set. http://electronicshelponline.blogspot.com/ Check this link to know more about the procedure to do a factory reset. Pull up older posts there, either by its left side bar, or see it in 'Timeslide' option. You have to enter its service mode option to do a factory reset. Details are there.

i want service code for nikai tv

Hi jcbd,
Did you get any solution so far?
I encounter the same probleme with my TV now
Please let me know what you did,
Thanks

By jcbd on Mar 10, 2010

I have a Vision Quest 32inch PVQ-32VGB and the some of the channels have locked and the factory password of 0000 does not work any suggestions? thanks