At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You should be able to find your local representative who should be able to help you.
Otherwise you can measure the center line of the door gasket width and length, there will be a company around which will make these up for you, but beware there are around 30 different magnetic gasket profiles available.
Pull on the end of the fixture (receptical). The fixture is made so that the receiving end of the recepticals slide off and on. Make sure your pulling on the receptical part and not from the bulb or cover. Just pull (mine seemed to have one end looser than the other, I pulled on the looser end) and it slides off. After your one end is off, lift the bulb and plastic tube cover out and replace as needed.
×