At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
i lost my security code for my car cd / mp3 player kenwood kdc x7529, Is there anyway to overcome this issue r shall i contact the dealer which has no representative in my country, i really miss listening to y music while driving, anyone could help please?i lost my security code for my car cd / mp3 player kenwood kdc x7529, Is there anyway to overcome this issue r shall i contact the dealer which has no representative in my country, i really miss listening to y music while driving, anyone could help please?
You can't post conmments that contain an email address.
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I can't say for sure, but you may have a bad flexible cable. Have you ever spilled any liquids on the face? If so, you may have some corroded traces in the face.
You have to go to a Kenwood car audio dealer in your area. They will pull the unit and get the serial # off the deck, call Kenwood and get you the code. If you pull it yourself you can save a little $... If you don't have the manual, go to www.kenwoodusa.com type in your model # under support and you can download install manual as well as user manual for free. Depending on the vehicle, it could be very quick or take an hour or so to pull the unit, it all depends on the mount. Hope this helps
Common Kenwood Security Codes Many Kenwood radios are configured with the same security codes:
KCAR - This seems to be a "backdoor" to some Kenwood models. 3051 - This is the security code which is printed in the manual of many Kenwood models. 1234 - This is a security code commonly chosen by Kenwood owners. Entering Your Kenwood Security Code If the car battery fails or is disconnected, the Kenwood will ask for the security code.
The
procedure to enter your security code differs on various models of
Kenwood car stereos. Here are three of the more common procedures:
Type 1 During
the code request mode, while holding the DISP key depressed, press and
hold the Volume UP or DOWN key for 3 seconds until the "..." display
disappears. Enter the security code using your Kenwood remote. Type 2 Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear. Enter the security code using your Kenwood remote. Type 3: Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'. Enter the security code using your Kenwood remote. Entering Letters on your Kenwood Remote To
enter a letter using your Kenwood remote, press a button once for the
first letter, twice for the second letter, and three times for the
third letter -- then press the Track Up or Next Track key to send the
letter.
To send the letter 'A', press the 2 key once and then
press the Track Up key. To send the letter 'B', press the 2 key twice
and then press the Track up key.
Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.
The key sequence to enter the security code KCAR is:
5 5 Track Up 2 2 2 Track Up 2 Track Up 7 7 Track Up Your Kenwood should then enter tuner mode.
A Security Code Bug in some Kenwoods There
is a reported bug in the security code handling of some Kenwood
stereos. In models with thie bug, the security code is stored
incorrectly. The workaround is to enter the wrong security code.
In
models with this bug, you have to decrement the third character of the
security code by one. If your security code was 1111, you would enter
your security code as 1101. If your security code was 9999, you would
enter 9989.
yep,its but you are going to need the original remote and a lot of time,im gonna try to help you if we doit together is going to be great for you,let me know when you are ready.
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
i lost my security code for my car cd / mp3 player kenwood kdc x7529, Is there anyway to overcome this issue r shall i contact the dealer which has no representative in my country, i really miss listening to y music while driving, anyone could help please?
×