My treadmill keeps going to Pause...how can I fix this? Model #309300 is there a reset button??????

Go to searsdirect.com and there you can find manuals.

please follow this steps and fix it. Merry Christmas
1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill. ·2
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
·3
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset

Reset it. and follow this steps and fix it. God bless you
1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill. ·2
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
·3
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset

Hold down the PAUSE Key and press CLEAR Key twice. Continue to hold the PAUSE Key until the SERVICE MENU appears. Use the Speed UP/DOWN key to scroll through the menus and the ENTER key to make a selection. Once finished CLEAR button twice will reset the machine for use.

follow this steps and fix it. God bless you

1.

• 1

Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

• 3

Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.

• 4

Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.

• 2

Locate the reset switch on the underside of the treadmill console. Usually the button

Dear Si:

Please go to the pag 48 from your user manual. If you do not have the user manual. go to the next web page: www.fitness.manualsonline.com and download for free, and follow the instruction for reset your wax bag device.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

DEAR sir:

you must go to the next web page:

http://fitness.manualsonline.com and download free, you must look by the aprox Model

another web: http://manualsfactory.com
sincerely.
E.CUADRA

You have to 'RECALIBRATE" the treadmill. This happens to my F3 all the time and it is very frustrating. Evidently there is no "fix" except to "RECALIBRATE.".

Here is how to do it (pay close attention because it gets TRICKY!):

1) Turn "ON" the treadmill;

2) Press the "RESET" button;

3) Here is where it gets tricky:

After you press the "RESET' button "PLEASE WAIT" or "WAIT" comes on;
As soon as the screen goes "BLANK" but before "SELECT PROGRAM" appears, hold the "PAUSE" button down until "DIAGNOSTICS" appears.

(I told you that was tricky... so after you press "RESET"... 'PLEASE WAIT" will come on... as soon as the screen goes "BLANK" you must hold the 'PAUSE' button before "SELECT PROGRAM" comes on. If "SELECT PROGRAM": comes on you have pressed and held "PAUSE" TOO LATE! You must time it right between 'PLEASE WAIT" and "SELECT PROGRAM" when the screen is BLANK. Why LifeFitness made this so difficult is a MYSTERY!!!!)

OKAY... TO CONTINUE...

4) After "DIAGNOSTICS" appears, use the arrows to scroll to "CALIBRATION."

5) Then press the 'START" button (make sure it's the SILVER not the black START button!)

6) The treadmill will then automatically cycle through a series of tests including speed and incline adjustments in order to complete the "CALIBRATION."

7) When successfully completed, the console will display: "PASS"

8) YOU'RE DONE! And your incline should work now. You may have to TURN OFF the treadmill and TURN it back "ON" so that you can resume using the treadmill.

Hope this helps! Once again... LifeFitness should have made this 'RECALIBRATION" much simpler!

Good luck! It's very hard the first time... but once you do it a few times, it gets easier!

you will need to go into service menu by pressing and holding the pause button then pressing the clear button twice , continue holding the pause until the service menu appears. then use the arrow up and select maintenance press enter then either use arrow up or down scroll and say refill waxer system or replacing wax bag press enter, this will reset upper console. Upon completion of this the go back into the diagnostic menu select system test press enter scroll up or down to waxer manual mode hit quick start and that will fire up the wax pump and your done

To get to the service menu start by pressing the pause button and keep it held down as you hit the clear button twice. The treadmill will reset and go into the service menu, and now you quite pressing the pause button.