Question about Measuring Tools & Sensors
Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
Posted on Apr 29, 2020
Tips for a great answer:
Apr 01, 2018 | Measuring Tools & Sensors
Oct 02, 2016 | Measuring Tools & Sensors
Dec 03, 2014 | Acu-Rite Acurite Wireless Indooroutdoor...
Nov 01, 2014 | Acu-Rite Acurite Wireless Weather...
Oct 26, 2014 | AcuRite Indoor / Outdoor Thermometer
Jan 15, 2013 | Measuring Tools & Sensors
Jul 04, 2017 | Acu-Rite AcuRite IndoorOutdoor Wireless...
Jan 14, 2018 | Acu-Rite Acurite Wireless Indooroutdoor...
Sep 18, 2010 | Acu-Rite Acurite Wireless Weather...
Double check the batteries to make sure they are installed correctly. If one of the batteries in the outdoor sending unit is in backwards, it will not send the outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed.
Aug 27, 2010 | Acu-Rite Adagio Clock Radio
57 people viewed this question
Usually answered in minutes!