How do I change the vat rate in a mercury 130 merchine

Question edited for full 'make model (what it is)'.
Question moved from Washing Machines category :>)

If you get ERR 3 when trying to enter into programming mode print the daily Z report and return to the programming mode.May 1, 2020

Mercury 130W ETR - Changing VAT Rates ' Cygnet Systems

https://www.google.com/search?q=mercury+130w+error+3

..

how convert 12.5% vat to 13.5% vat

Here is a detail summary to instruct how to do so.......................

http://www.hmrc.gov.uk/vat/forms-rates/rates/rate-rise-guidance.pdf

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

amount over old (1+old vat rate) times (1+new vat rate)

press and hold % button until disply current rate. Then enter newrate and press % agian.

To change the VAT rate:-

1) Press the [CA] button

2) Hold the [SET/%] button for about three seconds until the display reads 0.

3) Type 15 for the new rate of VAT

4) Press [TAX+} button

5) Press the [CA} button

To check the new rate you have press [CA] and [TAX+] to show the current rate, the [VAT-] is linked to the [VAT+] button and doesn't need changing.

Hope this helps

VAT is value added tax which is straight percentage. program tax one or two for the percentage and make sure your departments are set up taxable or non taxible. prgm 2 is vat probably and program 1 will be for dept. generally with casio.

Hi.
Has it had the system options set for tax? Was it calculating previously? Usually you just need to change the rate when you have a tax increase.

Mark

How do I program tax rate into my calculator? Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]