SOURCE: My whirlpool Model DUP915PWPB2 Serial FS5001830
check the white fuse that has 2 black wires coming from it on the control board...onthejob
SOURCE: 3 yrs old model; worked fine then no lights on front panel
i hate to tell you this, but more than likely the circuit board behind that light has gone bad. It is a costly fix at several hundred dollars, and this isn't the first one i've heard that has done this...
SOURCE: model #42PFL5603D/27, approx. 2 yrs old. Fine one
You have to check the 24vdc power supply to see if it is putting out the voltage or the backlight inverter board has failed. Disconnect the inverter board and see if the 24vdc come back.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
SOURCE: have proffesional series dishwater about 3 yrs
If you notice the dishwasher is dead, then most likely the thermal cut off has triggered. This is to prevent the dishwasher when there is an overheating of the heater or the motors.
You will need to provide the full model number of the dishwasher to help find the problem.
61 views
Usually answered in minutes!
×