Samsung refrigerator code -88 frezzer 88ref - Samsung Refrigerators

88 on its own is a Samsung code.

Did you check the evaporator coils at the back of the freezer. It the defrost timer, or the heater fails, if forms a large block of ice and there is no airflow.

https://all-errors.com/samsung-refrigerator-error-codes-88/

https://www.google.com/search?q=Samsung+RB2055SL+code+88+8

..

Quoting from link below:

"Try resetting it by pressing the top left and right buttons on the display and holding them for 10+ seconds. Let me know the outcome."

http://forum.partsdr.com/showthread.php?1243-FIXED-Samsung-Refrigerator-code-88-88-89

it seems it is defective control board problem

The 88 88 code indicates a modem communication error in the refrigerator. This error is not applicable in the U.S. It should be ignored. The control will conduct a self diagnostic check when it is powered up. When this code is encountered it will just need to be cleared and the refrigerator will resume normal operation. To clear the code, press and hold the POWER FREEZE and POWER COOL buttons simultaneously. NOTE: Be sure to press these two buttons at EXACTLY the same time -- no sound will be heard when the buttons are both pressed properly). HOLD the buttons down for about 8 to 12 deliberate seconds until the control beeps and goes blank. Leave the control in this diagnostic test mode and allow it to exit after it times out in that mode. This will take several minutes. When the test mode clears the fault code 88 88 and returns to normal operation, you should be able to set the controls on the unit and it will work normally.

Frank V.

Press and hold the energy saver button, and the lighting button at the same time until it beeps and clears, 10 seconds. When it goes back to normal panel do the same thing again which will put the fridge in a running diagnosis mode and see if any parts of the 8's are flashing, if so look on the back of the fridge at the error codes.

From http://www.samsung.com/us/support/supportMain.do

Your refrigerator is equipped with an onboard diagnostic system. If the diagnostic system detects a fault, it will display a specific line segment on you refrigerators LED display. If your refrigerator is displaying an error code, please note the error code, and reset the refrigerator by unplugging the refrigerator for 30 seconds. When the refrigerator is plugged in, it performs a self diagnostic check of the various sensors and functions. If the error code reappears your refrigerator will require service. Please click the "Create Online Service Request" button below this article to initiate the service process. After a power outage the display panel may start blinking "88 88." If you unplug the unit for 30 seconds then plug it back in the display will return to normal operation after several hours. The power outage/surge can cause a communication error between the circuit boards in the unit. It can take several hours for these boards to stabilize.

If the display does not reset, go to the Samsung Support link above, enter your model number, and follow the prompts to request a service ticket.

Good luck, and if this helps, please rate my answer!

Check your evaporator fan blade.
Maybe loose or bent

Start a movement to keep simple appliances simple. let's stop putting computers in refrigerators. the simple ones from the 50's are still chillin. I might shoot mine tomorrow, let it try to blink that away. 88 88, 98 A8, BANG!

Here is the complet repair manual. It has the information and more but I will need to search for a users manual. Have a look at this and let me know if this is helpful or you want me to continue my search. Thank You Sea Breeze