Question about The Computers & Internet

1 Answer

Hi Mynsfas account is locked I tried re-registering but it says Profile type already active... and when I press on the forgot password or username button it sends me the reset link but few minutes later says the link is expired I should try again it doesn't even load or send the OTP ... I tried using a different browser but still no change. Please kindly assist.

Posted by Anonymous on

Ad

1 Answer

Larry Ng

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • The Master
  • 5,932 Answers

We are not AFRICA we are USA>
we have no way to change anything there to there ,ever, sorry.

why not call them on the phone and ask for help
and again we are not them, ask them not use. ever.
we do not set policies there nor do we hack other systems. here.
ever. that would be illegall(sic).

call them (phones)
contact them , email
snail mail them if have that in africa.
walk in , and yell. now that for sure works eyeball to eyeball, like it did for 10,000 years.

Posted on Feb 29, 2020

Ad

5 Related Answers

Anonymous

  • 556 Answers

SOURCE: Username and password

You will probably need to reset your router to get access to it again with a known username and password. BEWARE THIS WILL PROBABLY RESET ALL CONFIGURATION INFORMATION AND YOU WILL BE REQUIRED TO COMPLETELY RECONFIGURE YOUR ROUTER INCLUDING POSSIBLY ISP SPECIFIC INFORMATION. If you cannot do this including knowledge of all the required answers and proceed anyway you may lose access to your internet connection until this is successfully done. Proceed beyond this point AT YOUR OWN RISK.

Follow the link below to determine the model of your router

Router Link

As your profile indicates you are from Australia -- there is a link at the top of the page for a DI-624+ that may also apply to you.

If this does not work or your model is not a DI-624 as indicated try the following Assuming you have a DLINK router

Go to www.dlink.com
Choose your country
Choose Support
attempt to access product information -- if your model does not appear there may be legacy products link on the page to choose

Download your user guide.

The following link may provide an emulator for your router to allow you to preview the configuration process (this does not configure your router. You may have noticed this emulators link earlier when accessing product information above, if you could not use the link.

Emulators Link

AGAIN PROCEEDING BEYOND HERE CAN RESULT IN THE LOSS OF ACCESS TO YOUR INTERNET SERVICE -- proceed with care.

Doing this will may require you to configure specific ISP required entries into your router to restore internet access, I do not know what those requirements are now. I may be able to research them if you provide information about your internet service provider such as their web site or help/support web site. Be aware that you will require all answers for this before doing it as you may not have internet access again after starting this until you successfully complete this. With all the previous warnings in mind you can consider the following step.

Using the instructions in the user guide you can probably reset your router and get access to the configuration.

Posted on Dec 14, 2007

Ad

Kloud

  • 1 Answer

SOURCE: Picture Msg account

K i gave in and called my service provider and they told me that my password was preset i had eventually just locked myself out.... simply call your provider and tell them you need your pic msg account reset and for them to send you your password

Posted on Dec 31, 2007

Anonymous

  • 145 Answers

SOURCE: forgot passwrd on a us robotics router

Generally you have to push and hold the reset button, i suggest for 30 seconds, this should completely reset the unit, including passwords and settings.

Posted on Jan 29, 2008

oldnovii

Jeffrey Pemberton

  • 667 Answers

SOURCE: D-Link AirPlus Xtreme G DI-624 Router setup

Hi Alex - Don't rate this yet please. Are you just setting up this router for the first time? If it is, try resetting it. Put the end of a paper clip in the hole marked reset on the back . Leave the router plugged in. The lights will go off and on as the router resets itself. Try this and let me know what happens. Thanks.

Jeff

Posted on May 22, 2008

getbackwindo

  • 84 Answers

SOURCE: Forgot username for admin acc in windows xp

Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess who’s going to have to help reinstall all the programs lost after a wipe?) But all hope is not lost. There are a few ways to actually retrieve a lost Windows account password. Read on, and we’ll show you the light.

1st Method:
The first thing which you check if you forget login password. When we install Windows, it automatically creates an account "Administrator" and sets its password to blank. So if you have forget your user account password then try this:
Start system and when you see Windows Welcome screen / Login screen, press ctrl+alt+del keys twice and it'll show Classic Login box. Now type "Administrator" (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows.
Now you can reset your account password from "Control Panel -> User Accounts".
Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen.

2th Method:
There are a lot of Windows password revealers and crackers available, but we’ve found that Windows Password Recovery Tool is the most effective.:
Windows Password Recovery Tool is one of the easiest password recovery tools to use. It allows you to reset a user account password, including the Administrator password. It is also a relatively small download.
Windows Password Recovery Tool Service: http://www.windowspasswordsrecovery.com

Posted on Apr 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost my phone and my number i once used to do the application i need to change my details


The web page, if you are referring to University of South Africa, has a web page menu to change phone. Use https://www.google.com to locate it.

Students who wish to change their contact details can do so by:
1. Login to my.nsfas.org.za
2. On the already registered tab
Enter your username and Password
Click on sign in button
3. Click on my personal details
Go to the cellphone number section
Delete and remove and type in the new cellphone number
Click on update details
4. OTP will be sent to your new number
5. Enter OTP and submit
6. Number is successfully changed (if a duplicate number exists student will get an error message)

NSFAS would like to encourage students to create their MyNSFAS accounts. The process is as follows:
1. Log in to www.nsfas.org.za
2. Click on MyNSFAS Account
3. Register to create a profile

Students who are unable to change their details online can use the manual process by emailing certified copy of their green barcoded ID or smart card, and a completed affidavit specifying that they have changed their cell phone number; with the new and old number listed to [email protected]

Jul 31, 2018 | Cell Phones

2 Answers

Forgot my username and password for my samsung account on my galaxy s7 . I can't do anything on my phone. Can anyone help ? Its Sprint service if that helps .


Your username is your email address, how can you forget that? Do a Factory Reset and then set up a new account. Write the details down. However, read these links first.

  • How to find your Samsung Account ID and Password - YouTube www.youtube.com/watch?v=W9F7CS946zU
    • BY SAMSUNG CONTENT
    • 2 MIN
    • 939K VIEWS
    2014-09-18 · Video embedded · How to find your Samsung Account ID and Password ... Samsung Galaxy S3 Glas Wechseln Tauschen unter 20€ Reparieren ...
  • How to reset my Samsung Galaxy S7 to the factory default ... support.bell.ca > Bell Mobility This option lets you erase all of the content and settings on your Samsung Galaxy S7 and reset ... account password to ... How to reset my Samsung Galaxy S7 to ...
  • Forgot Password Samsung Galaxy Ace S5830 How To Hard Reset ... www.youtube.com/watch?v=Fy6pmlmTwP0
    • BY HARDRESETYOURPHONE
    • 2 MIN
    • 94K VIEWS
    2012-07-14 · Video embedded · Forgot Password Samsung Galaxy Ace S5830 How To Hard Reset ... Samsung Galaxy S7 vs iPhone 6S Water ... Samsung Galaxy Ace - Forgot Password - Hard Reset ...
  • I lost my samsung account password? - I forgot my username ... www.askmefast.com > Computers & Internet > Google > Account I lost my samsung account password? I forgot my username and passw ... I forgot my samsung account password on galaxy ace so please anybody help here ? ...
  • Remove an email account - Samsung Galaxy S7 - Sprint support.sprint.com > Support > Devices > Samsung Galaxy S7 32GB Remove an email account - Samsung Galaxy S7; ... Forgot my username. ... Forgot my username. Forgot my password. Sign up for My Sprint; Sign up for My Sprint;
  • What is my Samsung account username ... - Samsung Electronics www.samsung.com/us/support/account/.../faqs/usernames-passwords.html The email address you used when you created your Samsung account is used as your username ... > Profile > Forgot your ID or password?. Tap the Find ID tab, ...


  • http://www.bing.com/search?q=Forgot+my+username+and+password+for+my+samsung+account+on+my+galaxy+s7+&src=IE-SearchBox&FORM=IESR02&pc=EUPP_

    Jun 01, 2016 | Samsung Cell Phones

    1 Answer

    How to open the GPRS of chinaphone


    creating data accounts:
    Steps:
    1. Open Services Menu.
    2. Open Data Account.
    3. Open GPRS.
    4. Create/Edit Data Account and enter the following values:
    For Globe MMS Data Account:
    Account Name: GlobeMMS
    APN: mms.globe.com.ph
    User Name: leave it blank
    Password: leave it blank
    Auth. Type: Normal
    For Globe GPRS Data Account:
    Account Name: GlobeGPRS
    APN: http://www.globe.com.ph
    User Name: leave it blank
    Password: leave it blank
    Auth. Type: Normal
    For Smart MMS Data Account:
    Account Name: SmartMMS
    APN: mms
    User Name: leave it blank
    Password: leave it blank
    Auth. Type: Normal
    For Smart GPRS Data Account:
    Account Name: SmartGPRS
    APN: smart1
    User Name: leave it blank
    Password: leave it blank
    Auth. Type: Normal
    5. Save the Data Account.
    Configuring WAP/GPRS/Internet Services Using the Data Accounts Created
    1. Open Services Menu.
    2. Open WAP.
    3. Open Settings.
    4. Open Edit Profile.
    5. Create/Edit a Profile and enter the following values:
    For Globe GPRS Profile:
    Rename Profile: myGlobe GPRS
    Homepage: http://www.globe.com.ph/globe.asp
    Data Account: GlobeGPRS (this data account is the one you have created)
    Connection Type: HTTP
    Proxy Address: 203.177.042.214
    Proxy Port: 8080
    Username: leave it blank
    Password: leave it blank
    For Smart GPRS Profile:
    Rename Profile: SmartGPRS
    Homepage: http://wap.smart.com.ph
    Data Account: SmartGPRS (this data account is the one you have created)
    Connection Type: HTTP
    Proxy Address: 010.102.061.046
    Proxy Port: 8080
    Username: leave it blank
    Password: leave it blank
    6. Save the Profile.
    7. Activate the Profile.
    8. WAP/GPRS/Internet services now ready to use. In case you encounter errors, double check the Data Account and Profile created. In some cases you need to restart the phone.
    Configuring MMS Using the Data Accounts Created
    1. Open Messages.
    2. Open MMS.
    3. Open Message Settings.
    4. Open Server Profile.
    5. Create/Edit a Profile and enter the following values:
    For Globe MMS Profile:
    Rename Profile: GlobeMMS
    Homepage: http://192.40.100.22:10021/mmsc
    Data Account: GlobeMMS (this data account is the one you have created)
    Connection Type: HTTP
    Proxy Address: 192.040.100.020
    Proxy Port: 8080
    Username: leave it blank
    Password: leave it blank
    For Smart MMS Profile:
    Rename Profile: SmartMMS
    Homepage: http://10.102.61.238:8002
    Data Account: SmartMMS (this data account is the one you have created)
    Connection Type: HTTP
    Proxy Address: 010.102.061.046
    Proxy Port: 8080
    Username: leave it blank
    Password: leave it blank
    6. Save the Profile.
    7. Activate the Profile.
    8. MMS services now ready to use. In case you encounter errors, double check the Data Account and Profile created. In some cases you need to restart the phone.
    This configuration is working perfectly using ZT321, Baizhao 8928 and IPhone Clone A380 and probably will work using other China Phones.
    If your SIM card is previously activated using other phones specially those phones supported by Globe and Smart, no need to activate your SIM. This is also valid for postpaid users since SIM cards are pre-activated for MMS, GPRS and other services.
    But if your SIM is not yet activated or never been used for MMS and GPRS, you need to activate your SIM before you can use MMS and GPRS services.
    For Smart SIM, you can use your China Phones to activate MMS and GPRS by simply sending/texting MMS ON / GPRS ON to 333 (I don?t know if this number is still valid). No need to download the configuration for Smart. Just use the configuration I?ve given.
    For Globe SIM, this is a little bit harder and need some workaround. I tried to call Globe Customer Service but they cannot activate your SIM manually on their system and the only way to activate it is by downloading the configuration thru text or by asking them to send the configuration. But since China Phones are not yet supported by any Service Provider, what you can do is to active MMS and GPRS using another phone. Monitor until your SIM is activated then transfer your SIM in your China Phone and enjoy surfing and sending MMS.
    In another forum, they said you can try using configuration for SE p900. I?ve never tried this but if this really works, well and good for China Phone fanatics.


    Jul 08, 2010 | Nokia 6300 Cellular Phone

    1 Answer

    Hi, i have an i9 phone and is having trouble setting up my MMS picture messages on my phone and downloading aswell so, can you help me. [email protected]


    T-mobile settings.... ATT/Cingular further down.
    MMS
    1-Message Settings-->click Server Profile
    2-Click on any 1--> click on Edit Profile

    1- Rename profile
    T-mobile MMS
    2- Homepage
    http://216.155.174.84/servlets/mms
    3-Data Account
    click on GPRS--> choose Tmobile--> press OK
    4- Connection Type
    HTTP
    5- Username
    leave it blank
    6 Password
    leave it blank

    CLICK ON DONE --> SAVE-->ACTIVATE PROFILE

    Everytime you choose Http as the connection type for your settings, the phone will ask you for a proxy address and port number.
    You need that info to be able to get your sevice to work

    Here is that info ...

    Proxy: 216.155.165.050
    port: 8080


    AT&T/Cingular Wap/MMS
    WAP

    ***First Step***
    1.Main menu --> Select Services
    3.Select Data Account --> Select GPRS
    5.Select the first entry
    6.Edit the account name to whatever you would like
    7.Edit APN to wap.cingular (lowercase)
    8.Edit Username to [email protected] (UPPERCASE)
    9.Edit Password to CINGULAR1 (UPPERCASE)
    10.Edit Auth Type. to Secure
    11. Save

    Select Back --> Select Back

    ***Second Step***

    Select WAP
    1.Select Settings --> Edit Profile
    3.Select the first entry --> Edit Profile
    5.edit the name to whatever you would like
    6.Edit Homepage to http://device.home
    7.Edit Data Account to the Name you established in the First Step
    8.Edit Connection type to HTTP
    9.The IP address is 066.209.011.032 and the port number is 8080
    10.Edit Username to [email protected]
    11.Edit Password to CINGULAR1
    Select back or done
    Select Activate Account


    You should now see a Black [G] in the upper left of your screen.


    MMS

    Select Messages --> MMS --> Message Settings
    Select Server Profile
    Select the first entry
    Select Edit Profile
    Edit Rename Profile to whatever name you would like
    Edit Home Page to http://mmsc.cingular.com
    Edit Data Account to the same data account you created for WAP
    Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
    Edit the Username to [email protected] (UPPERCASE)
    Edit the Password to CINGULAR1 (UPPERCASE)

    Oct 22, 2009 | Dual Electronics CECT P168 Cellular Phone

    1 Answer

    CECT P168 Unable to download MMS Says file too large. I tried the Tmobile website trick but it did not give it to me. What else can I try? I am desperate.


    you have to "Program" your unlocked phone to talk to the T Mobile server. Here is how you do it. It look scomplicated but its not.
    Settings for T-Mobile Service:

    • TMOBILE Internet Settings:
    1- Main Menu click on Entertainment then click on Services
    2- Click on Data Account–> click on GPRS
    3- Choose any account–> click on Edit
    4- 1- Account Name: TMOBILE
    2- APN: wap.voicestream.com
    3- User Name: leave it blank
    4- password: leave it blank
    5- Auth. Type: Normal
    CLICK ON DONE AND SAVE IT.

    CLICK ON BACK TWICE IT WILL TAKE YOU BACK TO SERVICES

    5-Click on WAP –> click Settings–> click Edit Profile.
    6- Choose any one on list then press ok–>Edit Profile
    1- Rename Profile->(name it anything or u can name it T-mobile GPRS)
    2-Homepage–> http://wap.myvoicestream.com
    3-Data Account–>Select–>click on Gprs–> you will see the one we named earlier TMOBILE, select it and press OK
    4- Connection Type: HTTP - > Proxy: 216.155.165.050 - > port 8080
    5- Username: leave it blank
    6- Password: leave it blank
    CLICK DONE AND SAVE IT—>CLICK ACTIVATE PROFILE AND SAVE.

    SMS, MMS AND VOICEMAIL:

    SMS:
    1- Click on thee envelope icon it will take you to Messages -->CLICK ON SMS
    1- Message settings–> click in Profile Setting
    2- Click edit on any profile name it T-mobile that will be line No. 1 in No.2 type +12063130004

    MMS:
    1-Message Settings–>click Server Profile
    2-Click on any 1–> click on Edit Profile
    1- Rename profile: T-mobile MMS
    2- Homepage: http://216.155.174.84/servlets/mms
    3-Data Account: click on GPRS–> choose Tmobile–> press OK
    4- Connection Type: HTTP : 216.155.165.050 - > port 8080
    5- Username: leave it blank
    6 Password: leave it blank
    CLICK ON DONE –> SAVE–>ACTIVATE PROFILE

    Apr 06, 2009 | Dual Electronics CECT P168 Cellular Phone

    2 Answers

    How, where can i get the i.p adress of my china phone n5310,


    hi dave, you can try visitiing smart centers, they can surely help you with that.

    Feb 15, 2009 | Nokia Cell Phones

    1 Answer

    Cannot Find Network!


    Solution #1 posted on Dec 22, 2008 0%20stars_w.png
    noavatar_s.gif eleitz
    Rank:nonexpert_s.gif Apprentice
    Rating: 0%, 0 votes
    At&t WAP Setup

    ***First Step***
    1.Main menu --> Select Services
    2.Select Data Account --> Select GPRS
    3.Select the first entry
    4.Edit the account name to whatever you would like
    5.Edit APN to wap.cingular (lowercase)
    6.Edit Username to [email protected] (UPPERCASE)
    7.Edit Password to CINGULAR1 (UPPERCASE)
    8.Edit Auth Type. to Secure
    9. Save
    Select Back --> Select Back

    ***Second Step***
    Select WAP
    1.Select Settings --> Edit Profile
    2.Select the first entry --> Edit Profile
    3.Edit the name to whatever you would like
    4.Edit Homepage to http://device.home
    5.Edit Data Account to the Name you established in the First Step
    6.Edit Connection type to HTTP
    7.The IP address is 066.209.011.032 and the port number is 8080
    8.Edit Username to [email protected]
    9.Edit Password to CINGULAR1
    Select back or done
    Select Activate Account

    You should now see a Black [G] in the upper left of your screen.
    To access the net select Services --> WAP --> Homepage.
    If it connects the Black [G] should turn Green

    MMS
    Select Messages --> MMS --> Message Settings
    Select Server Profile
    Select the first entry
    Select Edit Profile
    Edit Rename Profile to whatever name you would like
    Edit Home Page to http://mmsc.cingular.com
    Edit Data Account to the same data account you created for WAP
    Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
    Edit the Username to [email protected] (UPPERCASE)
    Edit the Password to CINGULAR1 (UPPERCASE)
    Select Done or Save
    Make sure to activate the profile and you are good.

    Dec 25, 2008 | Dual Electronics CECT P168 Cellular Phone

    1 Answer

    I have a hiphone a88 with suncom can you help


    Create Data Account:

    • Select Menu
    • Select Services (Sometimes, Entertainment > Services)
    • Select Data Account
    • Select GPRS
    • Select an empty profile
    • Set the Account Name to i-Net
    • Press Options
    • Press Done
    • Set APN to internet or mobileinternet
    • Note: i think it depends on the features on account. Assuming it will be internet for full internet.
    • Press Options
    • Press Done
    • Leave Username and Password blank
    • Set Auth. Type to Normal
    • Press Done
    • Press Save
    Create Profile:


    • Select Menu
    • Select Services (Sometimes, Entertainment > Services)
    • Select WAP
    • Select Settings
    • Select Edit Profile
    • Select a profile
    • Choose Edit Profile
    • Rename Profile to i-Net
    • Set Homepage to http://mobileinternet
    • Set Data Account select GPRS
    • Select i-Net
    • Set Connection Type to HTTP
    • Set Proxy Address to 66.150.33.115
    • Set Port to 8080
    • Leave User Name Blank
    • Leave Password Blank
    • Press Done
    • When prompted to SAVE please select Yes
    • Select Activate Profile
    • When prompted to Activate Profile please choose Yes
    • Press Done

    Aug 21, 2008 | RIM BlackBerry Pearl 8100

    1 Answer

    Iphone clone p168


    You need to do some setups for the internet.

    For AT&T

    Watch the YouTube video on internet setup for AT&T WAP
    ***First Step***
    1.Main menu --> Select Services
    3.Select Data Account --> Select GPRS
    5.Select the first entry
    6.Edit the account name to whatever you would like
    7.Edit APN to wap.cingular (lowercase)
    8.Edit Username to [email protected] (UPPERCASE)
    9.Edit Password to CINGULAR1 (UPPERCASE)
    10.Edit Auth Type. to Secure
    11. Save
    Select Back --> Select Back
    ***Second Step***
    Select WAP
    1.Select Settings --> Edit Profile
    3.Select the first entry --> Edit Profile
    5.edit the name to whatever you would like
    6.Edit Homepage to http://device.home
    7.Edit Data Account to the Name you established in the First Step
    8.Edit Connection type to HTTP
    9.The IP address is 066.209.011.032 and the port number is 8080
    10.Edit Username to [email protected]
    11.Edit Password to CINGULAR1
    Select back or done
    Select Activate Account

    You should now see a Black [G] in the upper left of your screen.
    MMS
    Select Messages --> MMS --> Message Settings
    Select Server Profile
    Select the first entry
    Select Edit Profile
    Edit Rename Profile to whatever name you would like
    Edit Home Page to http://mmsc.cingular.com
    Edit Data Account to the same data account you created for WAP
    Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
    Edit the Username to [email protected] (UPPERCASE)
    Edit the Password to CINGULAR1 (UPPERCASE)
    Select Done or Save
    Make sure to activate the profile and you are good.
    *********************************************************************
    Email will not work with any server that requires smtp authentication (which is pretty much all of them here)
    *********************************************************************
    There is no java in the browser. Forget it. There is also no java loader so there is no downloading java games. Copying them to the SD card won't work either. No java loader so the file will be unrecognized.
    *********************************************************************
    Wap services like gmail, yahoo email and wap based instant messagers work fine. Make sure you have a good unlimited feature so you do not incur overages from over using your new toy.




    For T-mobile:

    This is the one that worked for me - I have the $5.99 TMobile Web plan:

    Create Data Account
    1. Select Menu
    2. Select Entertainment
    3. Select Services
    4. Select Data Account
    5. Select GPRS
    6. Choose an empty profile
    7. Account Name enter T-Mobile WAP
    8. Press Options
    9. Press Done
    10. APN enter wap.voicestream.com
    11. Press Options
    12. Press Done
    13. User Name >Leave Blank<
    14. Password >Leave Blank<
    15. Auth. Type choose Normal
    16. Press Done
    17. Press Save

    Create Profile
    1. Select Menu
    2. Select Entertainment
    3. Select Services
    4. Select WAP
    5. Select Setting
    6. Select Edit Profile
    7. Select a profile
    8. Choose Edit Profile
    9. Rename Profile enter T-Mobile WAP
    10. Homepage enter wap.myvoicestream.com
    11. Data Account select GPRS
    12. Select T-Mobile WAP
    13. Connection Type select HTTP
    14. Proxy Address enter 216.155.165.050
    15. Port enter 8080
    16. User Name >Leave Blank<
    17. Password >Leave Blank<
    18. Press Done
    19. When prompted to SAVE please select Yes
    20. Select Activate Profile
    21. When prompted to Activate Profile please choose Yes
    22. Press Done

    If you have the $19.99 or higher plan replace the following:

    Step 7 under Create Data Account:
    Optional - change name from TMobile WAP to TMobile "whatever"
    Step 10 under Create Data Account:
    use wap.voicestream.com or internet2.voicestream.com or internet3.voicestream.com instead
    and
    Step 9 under Create Profile:
    Optional - change name from TMobile WAP to TMobile "whatever"
    Step 10 under Create Profile:
    change to www.tmobile.com - may not work so try google.com also

    SMS, MMS AND VOICEMAIL

    1- Click on thee envelope icon it will take you to Messages

    CLICK ON SMS
    1- Message settings--> click in Profile Setting
    2- Click edit on any profile name it T-mobile that will be line No. 1 in No.2 type +12063130004


    MMS
    1-Message Settings-->click Server Profile
    2-Click on any 1--> click on Edit Profile

    1- Rename profile
    T-mobile MMS
    2- Homepage
    http://216.155.174.84/servlets/mms
    3-Data Account
    click on GPRS--> choose Tmobile--> press OK
    4- Connection Type
    HTTP
    5- Username
    leave it blank
    6 Password
    leave it blank

    CLICK ON DONE --> SAVE-->ACTIVATE PROFILE


    VOICEMAIL:-

    Edit it--> name No.1 Viocemail
    No.2 +18056377243

    NOTE:

    Whenever the phone will ask you for a proxy address and port number.
    You need that info to be able to get your sevice to work

    Here is that info ...

    Proxy: 216.155.165.050
    port: 8080

    Aug 17, 2008 | Apple iPhone Smartphone

    4 Answers

    Cect p168 iphone clone


    CECT P168 Internet and MMS Settings that work | Email Info | Java Info Options bt_down_arrow.gif georgetaylor
    New User
    Posts: 4
    Registered: 06-21-2006

    p.gif
    environment-clouds.gif
    p.gif
    My Device: HP 6315
    Message 1 of 30
    p.gif
    Viewed 28,849 times

    p.gif
    WAP

    ***First Step***
    1.Main menu --> Select Services
    3.Select Data Account --> Select GPRS
    5.Select the first entry
    6.Edit the account name to whatever you would like
    7.Edit APN to wap.cingular (lowercase)
    8.Edit Username to [email protected] (UPPERCASE)
    9.Edit Password to CINGULAR1 (UPPERCASE)
    10.Edit Auth Type. to Secure
    11. Save

    Select Back --> Select Back

    ***Second Step***

    Select WAP
    1.Select Settings --> Edit Profile
    3.Select the first entry --> Edit Profile
    5.edit the name to whatever you would like
    6.Edit Homepage to http://device.home
    7.Edit Data Account to the Name you established in the First Step
    8.Edit Connection type to HTTP
    9.The IP address is 066.209.011.032 and the port number is 8080
    10.Edit Username to [email protected]
    11.Edit Password to CINGULAR1
    Select back or done
    Select Activate Account


    You should now see a Black [G] in the upper left of your screen.


    MMS

    Select Messages --> MMS --> Message Settings
    Select Server Profile
    Select the first entry
    Select Edit Profile
    Edit Rename Profile to whatever name you would like
    Edit Home Page to http://mmsc.cingular.com
    Edit Data Account to the same data account you created for WAP
    Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
    Edit the Username to [email protected] (UPPERCASE)
    Edit the Password to CINGULAR1 (UPPERCASE)

    Select Done or Save
    Make sure to activate the profile and you are good.


    *********************************************************************

    Email will not work with any server that requires smtp authentication (which is pretty much all of them here)

    Apr 16, 2008 | Apple iPhone Smartphone

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top The Computers & Internet Experts

    Mohamed Alazhary
    Mohamed Alazhary

    Level 2 Expert

    90 Answers

    john smith

    Level 2 Expert

    406 Answers

    Are you a The Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...