My snob just spins when I try to turn it on, on my washer GE model number HTWP1400F1WW top load,washer?

Sounds like the belt that spins the washing drum is slipping. It my need to be adjusted or replaced, or try washing a smaller load of laundry.

387780 does not seem to be a valid model number.
If you can locate the model number enter it here at sears Parts Direct.
Parts for Brands Craftsman GE Kenmore Whirlpool and more

Link to videos about washer not spinning.
top loader kenmore washer won spin YouTube

Put old coupler back on transmission shaft. Can you now turn coupler? You should not be able to. If you can, grooves in coupler are stripped out. Replace coupler. Part # WH49X10042

what is your model number is then we can started then okay

Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing Machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Check 1. the water level switch, 2. the timer, 3. the lid switch.

you need to post your model number

try repairclinic.com

give the guru the make and model number. They are the best with appliances.

Good Luck !

This is joyce
You have a bad belt it wont pull the load.
thanks,
joyce

you both need to have the switch replaced or you can open top of washer and combine the lid switches wires together as a bypass and electrical tape

the lid switches are put in the washers to keep kids from opening the washer machine this is automatic shut down

for xenazoe

you require this part for your washer
Part Number: WH12X10065
SWITCH PRESSURE