Question about Sharp Office Equipment & Supplies

1 Answer

Sharp xea101 rgeister will not feed paper - Sharp Office Equipment & Supplies

Posted by walt jones on

Ad

1 Answer

Attique-ur-Rehman

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sharp Master
  • 2,677 Answers

Https://www.youtube.com/watch?v=NJj8Vt7YrOw

Posted on Apr 09, 2020

Ad

2 Related Answers

Cogz

Chris Coughlin

  • 1326 Answers

SOURCE: Sharp AL-800 Paper Feed

Is this something that has been getting worse or just happen at once? If it just appeared it good be something in the paper tray stopping it from liftting or something behind the paper tray or in the paper path of the copier. If it has been slowly happen try to clean the paper pickup rollers with WD-40 and a rag and clean the rubber only. If that works you done, but if it say's to add paper you may have a broken paper present sensor. The jams could also be the paper feed clutch is worn out. Worse case use the bypass tray. Good Luck!!

Posted on Feb 08, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Sharp UX-184 Paper Feed

On inside of machine it states how to:
1. Place new paper roll on the left hub while pushing it in, lowering the roll into the compartment making sure it is inserted onto the right hub.
2. Pass the leading edge of the paper through the paper cutter guide and the cutter.
3. Remove any slack in the paper.
4. Close the cover. The paper will feed out automatically.

The paper rolls over top front to back.

Posted on Mar 05, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Trying to put in a new paper roll

Turn off the Sharp EL-1801V.

  • 2 Cut the end of the replacement paper roll for a fresh edge and to ensure a smooth feed. Do not tear the paper roll, as feeding a torn paper roll can cause a paper jam.
  • 3 Insert the cut edge into the paper opening on the back of the Sharp EL-1801V. Hold the paper roll so that the edge being fed into the machine is coming from the bottom of the roll. Turn the power on.
  • 4 Press the "Feed" button until the paper is fed through the unit. Lift the metal paper roll holder up. Slide the paper roll onto the paper-roll holder.

  • Read more: Directions for Replacing the Paper Roll on a Sharp EL-1801V ' eHow.com http://www.ehow.com/how_7294657_directions-paper-roll-sharp-el_1801v.html#ixzz1eNqkJA8g
    3helpful
    1answer

    Trying to replace the paper roll on a sharp EL1801V

    1 Turn off the Sharp EL-1801V.

  • 2 Cut the end of the replacement paper roll for a fresh edge and to ensure a smooth feed. Do not tear the paper roll, as feeding a torn paper roll can cause a paper jam.
  • 3 Insert the cut edge into the paper opening on the back of the Sharp EL-1801V. Hold the paper roll so that the edge being fed into the machine is coming from the bottom of the roll. Turn the power on.
  • 4 Press the "Feed" button until the paper is fed through the unit. Lift the metal paper roll holder up. Slide the paper roll onto the paper-roll holder.

  • Read more: Directions for Replacing the Paper Roll on a Sharp EL-1801V ' eHow.com http://www.ehow.com/how_7294657_directions-paper-roll-sharp-el_1801v.html#ixzz1eNqkJA8g
    0helpful
    1answer

    Sharp AL-1631 bottom paper feed will not pick up paper.

    A few things could be the problem.
    1. The paper in tray could be damaged
    2. The drawer separator pawls (metal taps on the right side of tray where paper touches)
    3. Paper backstop not in or in wrong spot (green plastic piece at back of paper)
    4. Feed tires are worn or dirty
    Does the copier try and feed from tray 2? If it tries but the paper doesn't leave the try look and see if there is a dark mark on the page (top middle towards the right). If so then most likely the feed tire is worn.

    0helpful
    1answer

    Flashing p and paper will not feed it jams

    Clean the paper feed roller under paper tray use izopropilic alcool.
    1helpful
    1answer

    "P" is blinking. There is no paper jam. Paper is not feeding from the paper tray.

    Hello sir; there is paper pick up roller dirty or worm, need to clean or replace.
    0helpful
    1answer

    Sharp UX-184 Paper Feed

    On inside of machine it states how to:
    1. Place new paper roll on the left hub while pushing it in, lowering the roll into the compartment making sure it is inserted onto the right hub.
    2. Pass the leading edge of the paper through the paper cutter guide and the cutter.
    3. Remove any slack in the paper.
    4. Close the cover. The paper will feed out automatically.

    The paper rolls over top front to back.
    0helpful
    1answer

    Sharp AL-800 Paper Feed

    Is this something that has been getting worse or just happen at once? If it just appeared it good be something in the paper tray stopping it from liftting or something behind the paper tray or in the paper path of the copier. If it has been slowly happen try to clean the paper pickup rollers with WD-40 and a rag and clean the rubber only. If that works you done, but if it say's to add paper you may have a broken paper present sensor. The jams could also be the paper feed clutch is worn out. Worse case use the bypass tray. Good Luck!!
    0helpful
    1answer

    Sharp EL-2196BL

    Make sure that it is installed properly ... going under not OVER. Does the paper feed when the paper feed key is depressed ??

    1. Lift the paper holder up.
    2. Fold the leading edge of the paper roll 3 to 5 cm. (Do not fold it slantwise.)
    3. Insert the paper roll from the left side of the paper holder and make sure the paper
    roll is set in the proper direction (with the paper feeding from the bottom).
    4. Insert the leading edge of the paper into the opening directly behind the print
    mechanism.
    5. Press the paper feed key and feed the paper under the edge of the paper cutter.
    Not finding what you are looking for?
    Office Equipment & Supplies Logo

    Related Topics:

    96 views

    Ask a Question

    Usually answered in minutes!

    Top Sharp Office Equipment & Supplies Experts

    k24674

    Level 3 Expert

    8092 Answers

    George Mclaughlin

    Level 2 Expert

    370 Answers

    Cindy Wells

    Level 3 Expert

    6278 Answers

    Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...