Question about Dishwashers

1 Answer

Miele G676SC dishwasher. Why does it only operate on pre-wash cycle?

All lights blink if I try any other program and it does not operate.

Posted by Carl Rose on

Ad

1 Answer

umesh bhatt

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 65 Answers

Check what are the program option in your gadget. Generally there will be two options one is NORMAL 55° (without pre-wash) and other is UNIVERSAL 55° or 65° (with a pre-wash).
Just try the first one. If it works then the second option has some problem but you can ensure that machine is otherwise working.

Posted on Sep 06, 2020

Ad

5 Related Answers

Anonymous

  • 117 Answers

SOURCE: blinking lights on kenmore 665

key pad need to be change

Posted on May 09, 2008

Ad

Anonymous

  • 334 Answers

SOURCE: All lights are flashing including Pre Def, Timer,

Not sure the make and model of your equipment you have there but sounds to me like your control board is trying to tell you it is bad.

Posted on Jun 12, 2009

Anonymous

  • 6 Answers

SOURCE: DIshwasher wont start, flashes pre-wash and was lights

1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher) 3) Pour powder indo the dishwasher 4) Turn the dishwasher controller to the top position (the 12 o?clock position) ? this is the eco-setting. 5) Press the on/power button on the dishwasher, so that it now turned on (a light will display) 6) Move the dishwasher controller to the ?R? position (it?s on the very left), and leave it there a second or two. 7) Move the dishwasher controller back to the eco-setting (the 12 o?clock position).

Posted on Jan 14, 2010

joe_lishman

Joe Lishman

  • 192 Answers

SOURCE: warning lights flashing for Anti flood system

The bottom "Y" 3 point hose at the bottom connected to main motor is of poor quality and does have 3 wire clamps. The hose does perforate and small pin hole causes water at the bottom to trigger the anti flood system with warning lights flashing and pump motor on ...

Posted on Jan 16, 2010

Anonymous

  • 523 Answers

SOURCE: Dishwasher will not operate. Kenmore 665

control panel

Posted on Jun 01, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Miele G 851Intake/Drain light flashes and program stops

http://m.miele.ca/OperatingInstructions/en-CA/Dishwashers/Previous%20models/Miele%20Dishwasher%20Manual%20G851%20SC%20Plus.pdf
Page 39
0helpful
1answer

MY BRAND NEW SAMSUNG DISHWASHER HAS POWER BUT WONT START THE WASH THE WASH CYCLE THE TWO CYCLE LIGHTS JUST KEEP BLINKING

What 2 cycle lights? Samsung dishwashers indicate problems and errors by making different lights light up and/or flash. We would need to know the model number too.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

0helpful
1answer

Intake/drain light on

Please check the INLET water pressure, remove the inlet and check. Now if there is pressure make sure that when the power is pressed there is a pre wash cycle to start the machine. If not there is fault in the program controller , please check the door switch and the panel board.
0helpful
1answer

Miele G863 SCVi All lights blink at the end and it doesn't dry

Check the web for,
2011-11-25_043923_g600__800_miele_service_manual.pdf

I found that PDF while working on fixing my Miele dishwasher and found it more helpful then most advice on the web.
3helpful
1answer

Miele g892 and just like everyone the red light comes on and dishwasher stops running> why cant you answer thic common problem>

The red light tell you there is a fault. You have to read the fault code and it will give you a general idea of the problem - to do this you have to enter the service mode of operation - close the door and turn the dishwasher on.
The Start/Stop light must be blinking. If the Start/Stop light is not blinking, press and hold
the Start/Stop button for at least 3 seconds to exit the cycle. The Start/Stop light should now be blinking.

Press and hold the Start/Stop button while turning the dishwasher on. Release the
Start/Stop button and immediately press it 2 more times. Flashing Intake/Drain and
Salt lamps and a lit Rinse lamp indicates successful accessing of services mode
Fault codes
F00 Pots & Pans Lit
F01 Sani Wash Lit
F02 Normal Plus Lit
F03 Normal Lit
F04 Economy Lit
F05 Rinse & Hold Lit
F06 Pots & Pans Lit
F07 Sani Wash Lit
F08 Normal Plus Lit
F09 Normal Lit Flashing

1helpful
1answer

I have a miele lab dishwasher g7835 and I need to see a 'programming manual' I have the Operating Instructions but need details on the pre-set programmes.

Hello Bernadette,
You'll want to contact Miele lab washer tech support at
(800) 991-9380

They can walk you through programming or send you the programming manual
Sep 15, 2009 • Dishwashers
0helpful
1answer

Drain pump runs continuously

Which model do you have and is there any fault codes showing on unit? I have all of the service manuels for miele products.I am factory auth. for service on miele.
0helpful
4answers

Miele dish washer

I have a miele G 643 SCVI Ingognito the re-0cccurring prob is the the drain/intake light comes on quite frequently I have to cylcle the on/off switch twice to clear the fault. I have check the drain line several time w/o any obvious findings what's next
0helpful
2answers

Dishwasher won't fill

could be. there is a float in the base of the machine. take the bottom front cover off and have a look. alternatively, tilt machine over and see if water runs out. water in the base of the machine means you have a leak
Not finding what you are looking for?
Dishwashers Logo

Related Topics:

106 views

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Brad Brown

Level 3 Expert

18686 Answers

Cindy Wells

Level 3 Expert

6278 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...