Question about Health & Beauty

Open Question

M51. Why does it show full charge but will only run for 10 min?

Posted by Walter Sparrow on

Ad

5 Related Answers

Anonymous

  • 224 Answers

SOURCE: IBM M51 ThinkCentre doesn t recognize 4gig installed memory

You can confirm this in the BIOS and i'm sure it will show 4GIG. Your Operating system maybe a 32 BIT OS, hence it will only show about 3... GIG. It's a limitation for a 32 BIT OS.

Posted on Mar 06, 2009

Ad
Richie_asg1

Richard Perkins

  • 1036 Answers

SOURCE: Runs for 10 mins then switches of and shows F15

F 15 = Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked.

Hope this helps.

Usually it just needs a good clean out with a proprietary drain cleaner in the outlet, and a few hot washes with soda crystals through the machine.

Posted on Aug 20, 2009

Ad

Anonymous

  • 94 Answers

SOURCE: Sony DSC-S70, battery not charging to a full charge

Batteries will lose their charge when not in use. If the battery is stored in the camera, the camera will use power from the rechargeable battery to maintain the time and date settings. This is normal operation for the battery and the camera.
NOTES: Removing the rechargeable battery from the camera when the camera is not in use is recommended. If the camera seems to drain the batteries too quickly even when it is not being used, service may be required .

Posted on Sep 22, 2009

Anonymous

  • 1 Answer

SOURCE: I bought a Samsung C3200

In mobile message and phone book is not opening what i have to do

Posted on Oct 26, 2010

mc1bean

Mike Cairns

  • 3053 Answers

SOURCE: samsung dishwasher model dmr77 runs for 3 mins

Hello, kurt

I was trying to help you out here. I was going back to some customers that asked questions in the past and it appeared that no one answered them, so I thought I would take some of my personal time to see if I can help. Even though this site may not have your exact model or brand, This link will help you tons. Here is a link to about everything you want to know about your dishwasher, from repair to trouble shooting it,pictures, video's. Just scroll around and you will see tons of information to almost any question you might have on your dishwasher. If you go to this link and click around, I am sure you will find out so much about your dishwasher, you will know more that the company that made it. Here Is the link for you to click on>>

http://home.howstuffworks.com/dishwasher.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://beta.fixya.com/users/mc1bean

Posted on Oct 27, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I determine whether the on-board charger is working?


The m51 is notorious for failure of the on-board charger. An easy check would be to plug an off board charger into the 3 prong female charging receptacle at the front of the joystick to see if you can bring the voltage up. You can test the on board charger with a voltmeter at the battery connections or charger joystick port with the charger plugged in. Hope this helps

Jan 13, 2016 | Invacare Pronto M51 Power Wheelchair

1 Answer

How do I reboot batteries


Hi mike , you could try a car battery charger to bring the voltages up but this rarely works , sadly your batteries are nearly dead..

One thing to note , check the charger , if the charger bad then the batteries will reflect that ..

Regards
Rob

Aug 03, 2015 | Invacare M51 Pronto Power Mobility...

2 Answers

I bought new gel batteries to replace the old gel batteries for my chair. Charged them for a day and a half and they showed to be fully charged. Used it for about an hour and it went dead. Old batteries...


Hello,I would get back to where you purchased the batteries and go from there.Take the charger also to ask them to test it,also keep the old batteries as they are as you say.Still okay.Take care and I hope this helped you.Colin

Mar 27, 2015 | Invacare Pronto M51 Power Wheelchair

1 Answer

Supertooth disco speaker issue


You need a new battery that supplies the full 2400 mah to unit. Batteries do wear out and the 1800 mah is not going to cut it.

Aug 24, 2017 | Audio Players & Recorders

1 Answer

IBM M51 8141,NO DRIVER FOR ACPI / NSC1100, my System win7 64 bit


Hi Darius...
IBM M51 8141 ACPI / NSC1100 drivers (xp/vista/win7/win8) can be found at driverupdate us
It will take 2 mins from you to install...
I hope I have helped you...
enjoy

Aug 22, 2011 | IBM Lenovo ThinkCentere M51-8141

1 Answer

What is the proper way to charge the Pronto M51


Eduardo After using your chair and the battery level lights are down with yellow or red lights showing just plug the chair into the wall socket and let er rip. Now really after using your chair during the day and you are ready for bed just plug in the charger and let it charge over night. In the morning unplug the charger and you should be set for the day. If you don't use the chair everyday always put it up with a full charge and about once a week plug it in and let it charge overnight. Never leave the chair plugged in all the time and never leave it for more that 24 hours. The charger has two lights on it one red and one yellow or green that are hard to see because they are under the rear cover. When the chair is fully charged the yellow light turns green and you can unplug the charger and you should have a full charge. Hope this helps you

Sep 08, 2010 | Invacare Pronto M51 Power Wheelchair

1 Answer

Someone gave me a pronto m51 sure step motorized wheelchair but no manual was given..my question is: Is it safe to charge the battery overnight? Is there any danger of overcharging? If anyone knows for...


Jo, nope you are safe. Most of the chargers are designed to cut off and go into trickle charge once they sense that the batteries are fully charged. The problem with overcharging comes after 18 hours or so. You should never leave the charger plugged into the chair for more than 24 hours. On the M51 the charger is built into the chair so just plug it in when you go to bed and unplug it when you get up and you'll be ok. You can check for full charge by looking at the charger there should be a red light and a green light when fully charged. Hope this helps

Sep 08, 2010 | Invacare Supply Group Invacare Pronto M51...

1 Answer

How do i know when my invacare pronto m5 is fully charged?


With an M51, a full charge will be indicated by all three joystick indicator lights lit- red yellow green. The green far right LED is the full charge light. Also the charger has indicator lights that go from red/yellow to full green at full charge. Hope this helps

Jul 11, 2010 | Invacare Pronto M51 Power Wheelchair

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

ray gallant

Level 3 Expert

71004 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35766 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...