Photography Logo

Related Topics:

Question about Photography

1 Answer

Pandigital frame. Why isn't it working?

When I try to turn it on with or without remote it just flickers on and goes right off

Posted by Sheila Young on

Ad

1 Answer

ADMIN Andrew

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Photography Master
  • 49,870 Answers

That is indicative of a power issue. Battery is not holding enough power to stay on.

Posted on May 21, 2021

Ad

5 Related Answers

Anonymous

  • 6 Answers

SOURCE: Unable to operate remote of Pandigital picture frame

remove the memory card and see if the remote works wit hthe built in memory pics. if it doesnt pic up your card you will just have to try another card. The frames dont read cards larger than 1 Gb very well either - reguardless of how many pics are on the card.

Posted on Dec 11, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: the Pandigital LCD Photo Frame's "frame extender" won't extend

Just pull it.... straight down. Too much torque may break it.

Posted on Dec 28, 2008

Anonymous

  • 373 Answers

SOURCE: Lost Remote

PANDIGITAL.com

Posted on Feb 04, 2009

Anonymous

  • 5 Answers

SOURCE: Cannot see Pandigital drives when I connect to computer

connect PAN813-B to another system if it not show drive it may faulty,if it show then check compatibility of pan drive to your system, it support or not

Posted on Jul 03, 2009

Anonymous

  • 1 Answer

SOURCE: Trying to move photos from Apple Mac to Pandigital frame

Its easiest to transfer the pictures to a usb drive or sd card and insert them into frame and copy them to the internal hard drive. Using Mac OS X Snow Leopard v10.6.2

Posted on Dec 28, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

PANDIGITAL Digital Photo Frame works perfectly except the SCREEN Flickers Black after a few moments

Annemarie, I had a similar problem with an off-brand photo frame from Wal-Mart last year, although in my case the frame would shut down entirely after it had flickered a few times. In my case, I was able to remove the back of the frame's case by removing 4 screws (two were hidden underneath model number stickers) and inspecting the device's innards... what I found was that, as you surmised, there was a loose connection from the female end of the DC-in power supply. The ground connection to the device's circuit board had been poorly soldered, leaving the connection itself loose and a small piece of solder on top of the board and very near the positive connection.
While not being the best solderer in the world, with the aid of a magnifying glass, a solder removal tool, and a ColdHeat soldering wand, I was able to heat the offending piece of solder and remove it from the circuit board and then, as I was personally uncertain of my ability to re-solder the connection without melting the board, I simply held the connection in place and applied a dab of hot glue to keep it there. After the glue cooled, I reassembled the case and the frame worked for almost another year before something else finally burned out and it was left cold and dark.
Hope this helps, good luck!
0helpful
1answer

My pandigital isn't turning on

Unplug the unit and turn it on in the unplugged state then plug the adapter in
1helpful
2answers

I have lost my remote for my pandigital photo frame. Can I buy another?

...or you can call the company, they're pretty reliable about replacing remotes.
0helpful
1answer

Discolored flickering screen

Take the AC adapter to a Radio Shack and have the voltage tested. If it's bad, replace it. If it works, proceed to next step.

Take out any external memory from the frame. Connect to your PC and it will appear as a removable drive named "Pandigital". Format this drive.

If this does not solve the problem, your LCD is going bad. You can't fix this. Find your receipt and call the company if you're still under warranty.
0helpful
1answer
1helpful
1answer

Unable to operate remote of Pandigital picture frame

remove the memory card and see if the remote works wit hthe built in memory pics. if it doesnt pic up your card you will just have to try another card. The frames dont read cards larger than 1 Gb very well either - reguardless of how many pics are on the card.
0helpful
1answer

Pan digital 7 frame screen goes white

Removing the internal battery will clear all settings. I have done this on two different versions of the Pandigital frames (seems to be a very common issue) and it has corrected the issue instantly both times.

Good luck.
Not finding what you are looking for?

137 views

Ask a Question

Usually answered in minutes!

Top Photography Experts

Tony Parsons
Tony Parsons

Level 3 Expert

6393 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

49870 Answers

Tom Chichester

Level 3 Expert

62329 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...