Question about Xerox Office Equipment & Supplies
Posted by Anonymous on
This problem occurs when you buy the wrong image unit.
The contact chip that is located at the bottom of the orange plastic is not for the machine. Replace it with 7750 image unit and that should fix your problem. Black is fault 9-910 cyan fault : 9-911 magenta fault: 9-912 yellor 9-913.
Posted on Oct 22, 2009
I had same problem and it was driving me crazy. Try this one:
Control panel -> Devices and printers -> xerox printer with mouse right click
Printer properties -> Options
From list you'll select configuration and it gives you drop down menu and from menu you need to select your printer.
I didn't try this one yet because more solid ink is still on the way but this gave me all printing options back. Before basic printing mode was selected.
Funny stuff, uh?
Posted on Mar 18, 2010
Testimonial: "see my added comments - thanks again"
SISODIYA COMPUTERS "I AM SOLVE THE PROBLEM FUSER TEMP ERROR "
BUTTON FAST PRESS STEP BY STEP
PREES- MENU BUTTON
* BUTTON(THIS IS STAR BUTTON)
^ BUTTON(THIS UP ARROW BUTTON)
YOU LAST BUTTON PRESS OK AND POWER "OFF" AND WAIT UNTIL 15 MINUTE AND PRINTER START PROMBLEM IS SOLVE FUSER TEMP
Posted on Jul 04, 2010
There is a snippet on the Xerox website to solve
imaging unit recognition problems, link below.
Usually this problem only occurs if the NVRAM has been reset or the engine
board has been replaced without backing up the NVRAM.
You can download the snippet to your printer through Centreware or by
downloading the 'File Downloader' utility from the same page above.
Hope this helps.
Posted on Jan 22, 2011
Tips for a great answer:
Jun 10, 2018 | Xerox Office Equipment & Supplies
Aug 11, 2017 | Xerox Office Equipment & Supplies
Sep 06, 2016 | Xerox Office Equipment & Supplies
Jun 01, 2015 | Xerox DocuColor 12 Printer
Mar 06, 2015 | Xerox Office Equipment & Supplies
Mar 28, 2010 | Xerox DocuColor 12 Printer
Nov 05, 2009 | Xerox DocuColor 12 Color Copier
Mar 23, 2009 | Xerox DocuColor 12 Printer
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: