Question about Frigidaire Ovens

1 Answer

My frigidaire stove gave an error code F10 and oven over heated how can I repair

Posted by Hugh Corr on

Ad

1 Answer

Cindy Wells

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 6,262 Answers

The F10 error can be caused by a faulty relay or electronic control board if the oven overheated while in use. If you unplug the range and the error occurs when the range is cool, then the over-temperature sensor has failed or the electronic control board is faulty. Even the wiring between parts could be faulty.

You need to check sensor and wiring. On some models, the oven temperature sensor probe can be accessed by opening the oven door. Look for two screws that are close together. Otherwise it's accessed from the back of the oven. It may be covered by an access panel. Unplug the wiring harness and check the resistance across the sensor with a multi-meter. It should give 1100 Ohms. Similarly check the wiring resistance from the probe to the control board. Also check the relay and that wiring. Replace the wiring, sensor or relay if those are faulty. Otherwise you need to replace the control board. The control board will be behind the console access panel. Somewhere on the back of the range, there will be a trouble-shooting sheet giving the wiring diagram and the expected resistance or voltage across the parts of the range.

I may be able be able to provide a parts diagram and price list for parts on your range. Please add a comment with the model number of the range for this information.

I hope this helps.

Cindy Wells

Posted on Jan 04, 2020

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: message panel keeps flashing F10 error

Code F-10 indicates a temperature runaway. There are two possible problems. 1) The oven temp sensor has failed. This can be checked using a standard multimeter. The sensor is located behind the rear access panel of your oven. The sensor should read about 1100 ohms at room temperature. 2) The oven control board needs to be replaced. There are no FRU's (field replaceable units) on the control board. Check the sensor first. Even a new control board is cheaper than a new oven.

Deepwater

Posted on Apr 30, 2008

Ad
localwonder

Michael Masters

  • 6784 Answers

SOURCE: Frigidaire oven F-10 error

HI. this is a oven temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp sensor asap.

Posted on Jun 01, 2009

Anonymous

  • 1 Answer

SOURCE: What does F10 display on my stove mean? Frigidaire Model PGF355DS

my frigidaire oven keeps flashing f10 and turning off

Posted on Aug 21, 2009

Anonymous

  • 1 Answer

SOURCE: F1 CODE ON FRIGIDAIRE STOVE

I have a F1 code on my Frigidaire convection oven and a really cool beeping sound to go with it. I turned the breaker off and turned back on---doing the same thing...????????

Posted on Apr 11, 2010

Anonymous

  • 1 Answer

SOURCE: kenmore model 790.9621 electric stove error code

it is the bake relay sticking--on the eletronic oven control board.i tried to buy the relays but,no luck.must buy the eoc board-great engineering

Posted on Aug 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Frigidaire oven shut off due to an f10 error which should I replace first since I have no tools to measure.ohms... sensor or EOC?


Good Morning mark, thank you for your post!

Based off the information you have provided your Frigidaire range is displaying an error code of "F10". An "F10" error code normally stands for a runaway temperature (overheating). This could be an issue with your RTD (Resistance Temperature Detector) or the EOC (Electronic Oven Control). I would recommend performing a reset on your oven and you can do that by flipping the household circuit breaker off for ten minutes. If you continue to experience an issue with the "F10" error code I would recommend having a professional technician out to your home for proper diagnosis and replacement of any electrical components. This will help you avoid any unnecessary part purchases. Hopefully this information has been helpful. -Matt

Feb 14, 2015 | Frigidaire Ovens

1 Answer

Frigidaire FEB24S5AB 24 inch F10


Hello friend, thanks for the post!

I understand your Frigidaire wall oven is flashing a F10 code and not heating up. Based off of that information an F10 code stands for a runaway temperature, which could be an issue with a sensor probe or oven control. It could possibly be a miscommunication with the board and that could be cleared out by resetting your appliance. To reset your appliance disconnect power to it by unplugging the oven or flipping the household circuit breaker for ten minutes. If that step does not resolve your issue and you continue to receive the F10 code I would recommend contacting a technician to come and repair your appliance. I hope this information is helpful. -Matt

Jul 23, 2014 | Frigidaire 24" Built-in Single Electric...

1 Answer

My frigidaire stove I have to umplugg it because keeps beeping f10 can' stop I push any bottom and keeps beeping


Hi Elizabeth! From what you have posted, your appliance is experiencing a high-temperature error code (F10). A high-temperature error indicates that your oven has reached too high of a temperature for too long of a time period. If unplugging your appliance does not prove to be successful, you would require a visit from a professional to check the temperature sensor and the electronic oven control (brains of your appliance behind the touch pad). If you have any other questions please comment so I can help!
Thanks,
Chris

Dec 18, 2013 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Crosley oven dont work f 10 gas


The "F10" oven error code means "Runaway temperature"

try this link http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/70424-what-does-f10-error-code-mean.html#ixzz2VTV50IJ4
http://forum.appliancepartspros.com

Jun 06, 2013 | Ovens

1 Answer

Digital display is reading F10 and beeping and the oven shuts off after burning Banana Bread I also had smoke coming out the back panel of the stove top


Hello,

The F10 error code means that a button on the touchpad is stuck.The error code can be cleared by pushing the cancel/off button and if the F10 returns the clock needs to be replaced since on that model the touchpad is part of the clock.


GENE

Sep 23, 2011 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

F10


Hello,the F10 error code means "Runaway temperature"most likely the problem is bad Electronic oven Control ("clock/timer").it has to be replaced together with the overlay because it's glued to the clock.
Thanks

Jun 01, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Kenmore model 790.9621 electric stove error code F10. The oven heats up on bake (set at 400 degrees) then goes into f10 mode; and seems to be heating up more. Answer for problem??


it is the bake relay sticking--on the eletronic oven control board.i tried to buy the relays but,no luck.must buy the eoc board-great engineering

Jan 02, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

F10 Error code on double oven.


Sir,
Check out this link

suggest to reset it by shutting off both main breakers to the stove , wait for one minute and switch breakers on again.

Thanks Good Luck
Appreciate to rate as "Fixya"

May 15, 2009 | Frigidaire 30 in. Electric Gallery Series...

Not finding what you are looking for?
Ovens Logo

Related Topics:

124 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Paul Carew

Level 3 Expert

3538 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...