Question about The Office Equipment & Supplies

1 Answer

My Epsom workforce 2750 keeps giving me the error message that the printer is jammed

Posted by Greg Bates on

Ad

1 Answer

Leroy Elliott

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Fixya-Fanatic:

    Visited the website for 90 consecutive days.

  • The Master
  • 425 Answers

Open front cover, move colored handles. remove paper

Posted on Dec 19, 2019

Ad

5 Related Answers

Anonymous

  • 54 Answers

SOURCE: Epson workforce 600 continue to

If this message appears when you turn the printer on it will need a repair, this will be down to a sensor fault.
If this message appears when you try to print Check you are using the correct paper type and size settings, on the printer if being used standalone or via the printer driver if using via a computer.
Also try using a different paper type and brand ideally Epson paper as it is an Epson printer. If the fault continues the printer will need a service.
As this printer was released this year you should be covered by some form of warranty, contact Epson for a service.

Posted on Dec 13, 2009

Ad
pineworks

Clive

  • 4345 Answers

SOURCE: My cannon pixma ip 1600 keeps giving an error

Hello there
You may not see a paper jam, so this is worth trying.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.

That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.

So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Apr 25, 2010

Printtech

LXK Chris

  • 1087 Answers

SOURCE: 202 printer jammed error message appears, but could not locate

Here's an article in the Lexmark website on Error: "201 Paper Jam" or "202 Paper Jam". This will guide you on where to locate the cause of the problem. Follow the instructions. But if you're having a really hard time locating it or you need more assistance, don't hesitate to contact Lexmark Technical Support. Thanks.

Posted on Jun 28, 2010

catssite

  • 1 Answer

SOURCE: HP Officejet Pro 8500 printer message "Paper jam"

An error code showing that there is paper jam alert, but no paper is in anywhere in the machine except in the tray.....I have checked all areas, taken the back carriage of the unit, opened the top and opened the machine. removed the paper tray, everything, but there is no paper stuck in the unit

Posted on Jul 02, 2010

Anonymous

  • 1 Answer

SOURCE: my brother mfc-6490cw printer keeps

my brother MFC-6490CW keeps coming up with an error message 'cannot print 70' how do i solve this?

Posted on Jan 09, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Workforce WF-2530 printer. When I turn it on, after a few moments it simple says PRINTER ERROR. SEE YOUR DOCUMENTATION." The MENU button does nothing. Holding RESUME and turning printer on


Does your computer have any further information when it's connected? "Printer Error" sounds pretty generic, not a lot of detail to tell you where to look.
I would open the ink loading hatch, and check that there's nothing jammed in there, that all your ink carts are fully seated.
If nothing there, head for the back of the printer, pull the paper-handling tray out, and see if there's paper jammed in there. replace.
Pull out paper tray, make sure there is paper there, and that there's nothing jammed in there too.
When you turn it on, is there any sound, like the printer head moving back and forth?
I have a similar printer, and the error messages I see are rather more informative. . .

Jan 15, 2015 | Epson WorkForce WF-2530

1 Answer

What does error message 0xFA mean?


Anyone else looking, this error was a printer jam for me. Open the back, clear the jam. Power back on, all set.

May 27, 2014 | Epson WorkForce WF-3540 Network-Ready...

1 Answer

Paper jam error message


On mine you have to take the duplexer out of the back of the machine to convince it there's no jam. On the 4350 you press 2 buttons on the sides of the duplexer and it slides out. Look at it, scratch your head and then push it back in. Magically the paper jam is cleared.

Apr 05, 2014 | Epson WorkForce WF-3540 All-in-One InkJet...

1 Answer

My workforce WF-3540 displays "PAPER JAM". I can find no jam


This sounds weird but I will post it since is solved this problem for me. Despite following all the instructions I could not get rid of the "paper jam" message on my WF3540 . In desperation I tried changing the yellow ink cartridge (which was low) and after the printer went through all its "new cartridge" routine - lo and behold the paper jam message was gone and the printer worked!

Sep 25, 2013 | Epson Workforce 1100 InkJet Plotter...

1 Answer

Workforce 630 paper jam


Epson Workforce 630 has two paper loading areas. One at the bottom and one at the top, back of printer. Make sure you set the printer to correct paper source, or just make sure paper is loaded in both trays to see if it starts taking paper in either one.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

Jun 17, 2017 | Office Equipment & Supplies

1 Answer

I keep getting a paper jam error and there is no paper in the printer. It prints one page and then gives me the error


usually there is some small piece of paper stuck somewhere, exploratory surgery with a LOT of LIGHT is the next step.

Jun 03, 2011 | Epson Workforce 610 All-In-One InkJet...

1 Answer

Epsom printer wont print says paper jam but has no paper jam


This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

Mar 24, 2011 | Office Equipment & Supplies

1 Answer

Epson workforce 600 continue to get paper jam error and there is no paper jam..


If this message appears when you turn the printer on it will need a repair, this will be down to a sensor fault.
If this message appears when you try to print Check you are using the correct paper type and size settings, on the printer if being used standalone or via the printer driver if using via a computer.
Also try using a different paper type and brand ideally Epson paper as it is an Epson printer. If the fault continues the printer will need a service.
As this printer was released this year you should be covered by some form of warranty, contact Epson for a service.

Dec 13, 2009 | Epson WorkForce 600 All-In-One InkJet...

1 Answer

I have error code e 90 on my epsom printer


Generally the fix for most "e 90" error messages on Epson printers is to check under the hood of the printer for something that is there and shouldn't be, eg. glue stick, pencil, paper jam, etc. Most e 90 error messages are solved by simply removing something that shouldn't be there. If, in fact, that doesn't fix it, you should try removing the printer catridges and re-setting the printer. If this still does not fix the problem you should try contacting the Epson Customer Service department and try and get a replacement printer, considering this is surely a hardware issue.

May 09, 2009 | Epson Stylus CX6000 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

482 Answers

Peter March
Peter March

Level 1 Expert

23 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a The Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...