Question about Dect Lands Phones
Posted by Anonymous on
I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.
reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.
Posted on May 30, 2008
first : go through settin up your phone with the manual( as much as im directing to manuals that much im staying out of my own way ) :) succes
Posted on Oct 22, 2008
I had the same problem. What worked for me, after several unsuccessful registration attempts, was to disconnect the phone handset battery for about 1 min and then reconnect the battery. Run the handset registration procedure again. It registered for me on the first attempt after the battery reinstall. Good luck.
Posted on Feb 19, 2009
Tips for a great answer:
Mar 20, 2016 | Uniden DECT 6.0 Cordless Phone
Dec 28, 2015 | Uniden Lands Phones
Mar 02, 2015 | Uniden DECT 6.0 Cordless Phone with...
Apr 30, 2014 | Panasonic Kx-tga106m Dect 6.0 Cordless...
Jan 29, 2013 | Uniden DECT 6.0 Cordless Telephone...
May 14, 2011 | Uniden DECT 6.0 Cordless Telephone...
May 05, 2009 | Lands Phones
Apr 07, 2009 | Uniden DECT 6.0 Cordless Phone ID
Jul 30, 2008 | Philips DECT 2252S Cordless Phone
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: