I have a 7260 HAC system and somehow the system constantly calls one number ALL DAY. The number is a disconnected number and when our patients call it says that this number islonger in service.

SOURCE: Call forwarding all lines on a NEC Dterm80 and blinding the back line numbers so that caller ID doesn't show the numbers to patients

I can possibably help on the manual, I have been able to find almost any manual for any system at the following site, www.wedophones.com. Just click on the word " manuals " in the upper right side, scroll to your phone system manufacture, click on it then scroll down to your exact phone system and download it to your computer. Good luck. .....Mike

Posted on Jul 28, 2008

SOURCE: Hydrostatic mower goes in reverse but not forward. Only 73 hrs on it!

On my hydrostatic there is an adjustment on the forward/back lever which can be made to run all reverse or all forward. Normal setting gives both of course. Look at that adjustment. Maybe something let go.

Posted on Oct 14, 2008

Carl Navarro

• 2460 Answers

SOURCE: have the comdial phone 7260-00 HAC and need to

Timeset for
Comdial DX-80

• Press "Feature" "#" "*" and enter your password (default is "########").
• Press "Show" and "0814"
• Press "Save" and then "Show".
• The option to change the year appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the year and then "Save" and "Next.
• The option to change the month appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the month and then "Save" and "Next.
• The option to change the day appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the date and then "Save" and "Next.
• The option to change the weekday appears. Press "Next" to skip. To change, press "Chg" until you see the day you want. Press "Save" and "Next.
• The option to change the hour appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the hour in military format and then "Save" and "Next.
• The option to change the minutes appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the minutes and then "Save".
• Press the "On/Off" button to exit the programming mode.

Posted on Nov 04, 2009

george peters

• 860 Answers

SOURCE: Nortel T7316E Call Forwarding - Outside Line

The Nortel call forwarding (feature 4) is for forwarding the ringing and intercom from one extension to another.ex. if you were going to be working in the conference rm. instead of at your desk,with the forward on to the conference rm. extension, the calls you get at your desk will transfer to the conference rm. phone. Call forwarding through your service provider is done by accessing the telephone line you wish to forward, dial *72 (you should get dialtone reordered)and dial the telephone number to where you want the calls to be forwarded to. the party on where your forwarding the line to has to answer the line for the forward to take place. to remove call forwarding , access the line you have the forward on and dial * 73, you should recieve a stuttered dialtone for confirmation that the service is off

Posted on Dec 08, 2009

SOURCE: How to program comdial 7260-00 HAC phone to ring

to set time
press feature #* then press # eight times press show press 0814 press save press show the year will display change if necessary then press next and continue through the month, day of month then day of week and hour and minutes to change the time and save after changing any of the settings I pickup the handset and hang it up to get out of the programming mode

Posted on Oct 03, 2010