Question about Zephyr Kitchen Ranges

Open Question

My zephyr vent hood fan will not turn off. The light seems to be working properly but the fan is not responding to the buttons.

Posted by Anonymous on

Ad

2 Related Answers

Anonymous

  • 171 Answers

SOURCE: Zephyr Milano hood fan and lights stop working. Power is on.

Hi ronio,

I'm Harvey the Master Plumber.

Your problem is: After the power went out your Zephyr hood lights and fan don't work at all. There is a faint glow on the digital display but the fan and lights don't respond to pressing the control buttons.

First check the circuit breaker. If OK then check the transformer in the unit. It's next to the fan motor. If no power on the high side then you have a loose or broken connection. If you have no power on the low side the you have a bad transformer. If OK then you have a bad control board.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Posted on Sep 27, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: replace fan/light switch zephyr pyramid range hood

I am also looking for instructions for PLHV36W6CC.

The fan is on right now but the switch is sliding back and forth loosely.

I just downloaded the manual but that was no help.

If someone has a quick solution, that would be great.

Please email me at [email protected]

I have stuck my hand up and fiddled around but besides just ripping it out, could use some help.

Thanks,

Robert
www.150FastGroup.com

Posted on Aug 03, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan and lights blew off


check the fuse. (see post about control board.)
excerpt: ... the control board is in the front of the hood behind the speed & light power buttons. There is a 3/4" Buss fuse onboard that seems to pop on my hood every few months.

Mar 06, 2014 | Zephyr Typhoon AK2100 Kitchen Hood

1 Answer

Vent won't work


Check to see that there is power to the vent hood. Sometimes a breaker will not reset correctly.

Feb 23, 2010 | Zephyr ZVE-E365 Venezia Wall Hood

2 Answers

Fan and light does not turn on .


FAN AND LIGHT DOES NOT WORK
my zephyr typhoon stopped working. Neither light not the fan come up. I am sure there is power going into the unit. I turned on the light one day , the light cam on and suddenly went away. From then even the fan stopped working. any information on what happened is appreciated. Thanks

Jan 22, 2009 | Zephyr Typhoon AK2100 Kitchen Hood

1 Answer

Light blub burnt out


The easiest way to remove the light bulb is to wear a rubber glove, use your palm to press against the bulb, and turn counter-clockwise.

The suction created by the rubber glove should allow you to remove the light bulb easily.

Jan 12, 2009 | Zephyr Savona ZSA-M90S Kitchen Hood

4 Answers

Neither lights nor fans work


don't know model but they are all much the same.
there will be a pcb behind the control buttons and you will find some of the track burnt out causedd by the bulb blowing. do a soldered wire link across the burnt section of the track

Sep 25, 2008 | Zephyr Typhoon AK2100 Kitchen Hood

1 Answer

Zephyr Milano hood fan and lights stop working. Power is on.


Hi ronio,

I'm Harvey the Master Plumber.

Your problem is: After the power went out your Zephyr hood lights and fan don't work at all. There is a faint glow on the digital display but the fan and lights don't respond to pressing the control buttons.

First check the circuit breaker. If OK then check the transformer in the unit. It's next to the fan motor. If no power on the high side then you have a loose or broken connection. If you have no power on the low side the you have a bad transformer. If OK then you have a bad control board.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 22, 2008 | Zephyr Milano-S ZMI-M90S Kitchen Hood

3 Answers

Zephyr typhoon AK2100 Kitchen Range Hood


its the relay inside that controls which speeds the hood works at this connects to the switch speed control

Jun 01, 2008 | Zephyr Typhoon AK2100 Kitchen Hood

1 Answer

No suction


There is a set of blocks that are installed on the venting system to make the unit recirculate....use the manual to find them and make sure your not venting half outside and half into the kitchen.

Feb 02, 2008 | Zephyr Pyramid ZPY-E30S Kitchen Hood

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zephyr Kitchen Ranges Experts

Dale Copeland
Dale Copeland

Level 2 Expert

104 Answers

Len

Level 1 Expert

25 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Zephyr Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...