I need to program ic-f3gs-2 radio - Radio Communications

CS-F3011 Icom Software for IC-F3011 & F4011 - Download

https://quality2wayradios.com > store > icom-cs-f3011-...
Icom Programming Software for IC-F3011 & F4011 ... This item is for download only. We no longer ship CD's. This cloning software is designed to perform data entry ...

IC-F3011/F3013/F4011/F4013 Instruction Manual - Icom ...

https://www.icomamerica.com > downloads > Do...
PDF
manual contains important operating instructions for the IC-F3011/. IC-F3013 vhf transceivers ... ceived, according to the pre-programming. (For IC-F3013/.

Try looking up the user manual at www.mods.dk they have many manuals. Otherwise you may be able to get the manual from www.icom.com.

Download the manual from here:
http://www.icomamerica.com/en/downloads/default.aspx?Category=142

I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Try contacting ICOM AMERICA

www.icomamerica.com or look on eBay.

.

Using the ICOM F3GS program, go to COMMON 1 and set the INACTIVE TIMER to something other than what it currently is.

Might work...

I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

firstly you will need to access the menu if you cannot these may be programmed using the proper software ,you will be able to unlock it then or give it to someone that can program it for you

I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Programming the CP100:
http://www.thekidshuttle.com/ABC%20Docs/CP100_Manual.pdf

Programming the IC-F11:
I believe one must purchase software and a programming cable to program the frequencies of this radio.

ic a 23 quero scannear como fazer /???
please scam mode /???