Question about HP DeskJet 5150 InkJet Printer

1 Answer

Status is 'printing' but its not printing at all

I recently move my painter back to my computer. I plugged the painter in where its supposed to be. After several reboots, I tried to test it but nothing comes out. I look the status and it says 'printing' and pages '3/1'

I recently changed my ink cartilage, cleaned the painter, make sure the papers aren't jammed and it still doesn't work. It didn't even bothered to pick up a paper to paint.

The problem happened when I take the painter to another computer (because I don't know how to use painter sharing).

My computer is Windows Vista, thank you

Posted by morningglow2 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Have you tried installing the original drivers that come from vendor in the box? this problem usually occurs when you have some driver issues.

Posted on Sep 18, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nexus 7 will not turn on and its only a week old


You may want to try and do a hard reset/reboot which will hopefully bring the Nexus 7 back to life.

  1. Press the power button and both volume keys for several seconds. The computer screen will eventually blink off. Continue to hold until you see the Android recovery logo and the large Start selection at the top of the screen.

  2. Move the volume keys up and down to see the menu selections. If you don't want to factory reset, you can try to Power down or to Restart bootloader from these selections. The power key will select the option.

Hope that helps!

Mar 18, 2013 | ASUS Google Nexus 7 Tablet

1 Answer

Media test failure message. Reboot and Select proper boot device


A hard disk failure can be catastrophic if it jeopardizes the data stored on your computer.


In addition to rendering a laptop inoperable, a failed hard disk can damage other files stored on the drive as well.


It is critical to determine whether an actual drive failure has taken place, and there are several steps to troubleshoot a drive before hard disk failure can be declared.



Unplug any devices such as printers, speakers, cameras and other external peripherals. Boot the laptop by pressing the power key.


If this does not result in a successful boot, try booting Windows in "Safe Mode."

Reboot the computer, and hold down the F8 key this will vary depending on your computer and operating system


From the menu choices, choose "Boot Windows in Safe Mode".


If the boot up progresses, then the computer is likely experiencing a software issue, not a hard drive failure.


Reset the hard drive.


This will involve turning off laptop (removing the battery is a good move, too) opening the laptop unit, and unplugging all connections and cables from the hard drive.


If possible, replace the hard drive with another drive.

This will help determine if the hard drive is causing the problem.


Plug all connections back in to the hard drive, and reboot the computer.

Repeat Step 2 if necessary.


If the computer does not reboot, the laptop is more than likely experiencing a hard drive failure and will probably have to be repaired by vendor.


hope this helps




Oct 09, 2012 | mpc X3000 Laptop Transport 14.1" Barebone

1 Answer

I have an AOC e2243Fw series monitor, less than 2 months old. i recently moved my computer from one room to another. Plugged all the cables in. My cpu works fine, but m monitor is telling me no signal. I...


You have problem with computer. Is you video card is built in. if not reset the video card of your computer. Full it up the card and return i again to the socket. Then check your monitor.

Sep 08, 2011 | Computers & Internet

1 Answer

Printer suddenly will not communicate with the computer. Tried unplugging both wall plug and usb plug. Printer can print but only test page. Tried to uninstall, but computer won't allow me, gives error...


Hi,
Have you tried rebooting your PC? Do you see a printer Icon in the taskbar (right corner) if so click on it and you may see several que's and the printer is bound up, so-to-speak. The reason your able to do a test print is because that command bypasses any que's in memory. Turn your printer power off, then reboot your PC. Onces its booted up, turn on your printer. This will clear any que's and your printer should communicate again.
Let me know if this help you.
Thank you

Jul 04, 2011 | Computers & Internet

1 Answer

My paint brush drawer won't open for Corel Painter Essentials 4!


Hey man, I feel you pain. I have windows 7 now too (64 bit) and CPE4 is giving me exactly the same problem. I can do everything except open my brush drawer, or acess my recently used brushes/favorite brushes.

I've been looking for a solution for days. I'll post here again if i find something.

Jul 28, 2010 | Corel Painter Essentials 4 for PC, Mac...

1 Answer

Corel Painter Essentials 4 Won't Run on my XP


You may have an incompatible version of that software. You might want to try an earlier version of essentials.

May 16, 2017 | Corel Painter Essentials 4 for PC, Mac...

1 Answer

I removed some programs that wasn't used and defragmented the computer. A few days later I moved the computer to another room and the unit wouldn't come on. I tryed it in several outlets but still wouldn't...


insure that the power plug in back of your computer is firmly pushed in. if that fails look in back of your computer you will see a little orange or red switch .
it will read 115 when you click it to the side or down it will read 220 or 230. click it to 220 and boot computer. if computer comes on click it back to 115 then reboot . let me know if this resolves the problem. if not i will assist further.

Nov 15, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

Logitech Z-5500 DON'T POWER ON. HELP!!!


check its power supply if its working, first.check the outlets(electrical sockets)just to be sure of proper fit.

May 31, 2009 | Logitech Z-5500 Computer Speakers

1 Answer

Computer dosent turn on..screen is blank with blinking LED


have u tryed
unplug all of your plugs at the back like blow on them like i do to get lil partcals of dust out then plug all back in and mite work or maybee ur power cord is screwed a bit and u mite have to get a new one whats happednd to ur comp happend exactly the same with mine and i screwed with myn for ages and it finaly worked so maybee just try all that n then if that dosent work as drliativ hes a good guy and will help

hes helped me out a few times hes a great guy

Dec 02, 2008 | Smart Modular SV3170A

Not finding what you are looking for?
HP DeskJet 5150 InkJet Printer Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6169 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...