Question about Minolta Office Equipment & Supplies

1 Answer

Minolta 2400W Wont try to feed paper.

Magicolor 2400W. Not used for a while. paper feeding didn't work so disassembled cleaned and reassembled. Now it makes no attempt to feed paper pickup roller never moves and I have rapidly blinking Ready and error lights PLUS rapidly blinking Yellow and Black toner lights. it does this as soon as power is switched on - before even the standard rotation of the toners

Posted by Rincewind on

  • Rincewind Mar 04, 2020

    Thanks for the service manual
    I'll take it apart and have a look when I have some more time

×

Ad

1 Answer

Larry Ng

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Minolta Master
  • 5,969 Answers

IT is 16year old today, and there are no spare parts, for it.
cept used on ebay.
the blinking lights in the manual mean, toner cartridge dead or fake one installed. on page 11.
if got it to work there are no windows 10 drivers, now. XP yes.

see that page 11 states on errors.
https://www.manualslib.com/manual/90066/Konica-Minolta-Magicolor-2400w.html?page=11#manual


the service manual is here,

https://www.manualslib.com/manual/805991/Konica-Minolta-Magicolor-2400w.html


RTM?

Posted on Mar 01, 2020

Ad

4 Related Answers

Anonymous

  • 170 Answers

SOURCE: Konica Minolta 2400W Magicolor. Error light blinking

Ready indicator Error indicator Condition Action
Green Orange
Blinking Blinking Communication Check The Printer
error cable
____________________________
Print over-run Turn off the printer.
After a few seconds
turn on the printer
change to a lower
resolution.
________________________________________________________



This may help if not...let me know........Whytfang

Posted on Mar 25, 2009

Ad

SOURCE: Paper feed issue

You didn't setup the paper size correct, check again in the driver and application to have the same dimension with the actual paper in printer.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Posted on Sep 03, 2009

SOURCE: Error light flashed when trying to print with Magicolor 2400W

Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Posted on Sep 03, 2009

Nikolay Boychev

  • 525 Answers

SOURCE: konica minolta magicolor 2400w

The possible reason for error is the printer does notread chip on the cartridges.
The reader for chips locate inside the printer bottom ofcartridges.
Take out all cartridges and you see reader it is a small blackplastic which come three contact plates.
Just clean it with compressed air and take out if some contactplate is sedentary.

Posted on Apr 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing doesnt start at top of page


Sure the paper is correctly document may be the printer thinks the paper is metric instead of inch check the printer setting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Jul 12, 2012 | Minolta magicolor 2400W Laser Printer

1 Answer

I have only 2 problems. I have a magicolor 2400W that is about 6 or 7 years old and I bought a non-OEM black cartridge to replace the old one and I get over print in the background. If I get a OEM...


I have a Magic color 2400W, I have the same problems.
You need replace the cartrigde, after drum laser, maybe the Fuser units is failure or Transfer unit

Is more cheap if you buy a NEW one. I recommend buy the Newest model, included cartrigde , warranty and more. Replace parts on your used printer is more cost that buy a new one.

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Sep 23, 2011 | Minolta magicolor 2400W Laser Printer

1 Answer

The error light stays on


Hi

Try to open the blue cover and close it. Then press a few times the "rotate toner" button. After that powerswitch off and on, should run.
If it´s don´t worked, make sure you have every transport secure away from the cartridges.
The contact`s should be clean in Printer and on cartridges.
If still the same prob, start from first tip.
It´s worked by my 2400W feed new toner

hope it can fix your issue
Thanks for using Fixya

Mar 25, 2010 | Minolta magicolor 2400W Laser Printer

1 Answer

The ERROR light of my Minolta magicolor 2400W Laser Printer stays on. I have inserted a new drum and all the cartridges are full. What do I do?


Try to open the blue cover and close it. Then press a few times the "rotate toner" button. After that powerswitch off and on, should run.
If it´s don´t worked, make sure you have every transport secure away from the cartridges.
The contact`s should be clean in Printer and on cartridges.
If still the same prob, start from first tip.
It´s worked by my 2400W feed new toner.

Nov 25, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Magicolor 2400w prints page and then says jammed


It`s possible you`re using too heavy paper, same problem´s with thin sheet´s?

Oct 03, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Paper feed issue


You didn't setup the paper size correct, check again in the driver and application to have the same dimension with the actual paper in printer.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jun 04, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta magicolor 2400w will not print


will print??? or the paper not coming out of the draw does it work using the bypass tray???

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Jun 03, 2017 | Konica Minolta magicolor 2400 Laser...

4 Answers

Magicolor 2400w won't feed paper


CLICK HERE for the manual

See page 55 for cleaning the media roller.

Jan 26, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Magicolor no longer grabs thicker papers


I think you need to clean take up roller first, and then set the settings in printer propertis in thick paper.
shold work.

cleaning:

open cover, remove imagine unit, then you can see the take up roller. clean it.

Dec 25, 2007 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Ed
Ed

Level 3 Expert

479 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...