Question about Measuring Tools & Sensors

1 Answer

Clock always indicates pm rather than am making the date wrong

Lacrosse technology weather station clock, 9n14 V030U

Posted by Robert Richards on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

Give details about the clock. Is it mechanical or electronic?

Posted on Oct 25, 2019


5 Related Answers


  • 1 Answer

SOURCE: How to adjust the altitude in this weather

I solved it by my self by a try and error procedure

Posted on Oct 12, 2009


john milligan

  • 514 Answers

SOURCE: need instructions for model #2316 La Cross

per the manual at on page 2 section 5 the unit sets its self to the world time radio signal from boulder colorodo on its own after it get the security code from the sensor pack.

Posted on Nov 18, 2010

tina gallow

  • 123 Answers

SOURCE: I cannot find my user

You can dowload this manual
at the site below.

Posted on Dec 14, 2010


David Dunn

  • 8546 Answers

SOURCE: i have a lacrosse technology wall clock how do i

You don't set the time. You set the Time Zone and it sets itself.

What model is YOUR clock?

This site lists several models of La Crosse wall clocks with downloadable instructions.
The link below is generic but there are specifc downloads for clocks with other features.

Posted on Jan 20, 2011


  • 7 Answers

SOURCE: I lost my manual for the Lacrosse Technology

You can get one at

Posted on Jan 23, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Smart Gear STG-5939-KB, Weather Station does not indicate the correct day. Instructions say it will adjust to the date. The date is 5/4 but the dat says TUE. Any ideas?

Your Smart Gear Weather Station may be defective. I have an atomic lock that indicate DST all year round but changes time correctly. One other thought: your weather station may be set for the wrong year.

May 04, 2018 | Measuring Tools & Sensors

1 Answer

I have a weather station 9N14 V030U and I can't get the outside temperature to program. We just changed the batteries in both units.

  • Remove all batteries
  • Install replacement batteries in the outside unit
  • After allowing time for the outside unit to initialize and begin transmitting data, install batteries in the inside unit. You should see the outside temperature displayed.

May 28, 2017 | Measuring Tools & Sensors

1 Answer

I would like to change the time zone

You can change the time, but it will still display your local temperatures.

May 28, 2016 | La Crosse LaCrosse Technology Weather...

1 Answer

How do I chage time on lacross clock

An atomic clock, by definition, sets the time automatically.

Feb 19, 2015 | Lacrosse La Crosse Technology Atomic Clock...

1 Answer

What does an OF symbol mean in the indoor temp window with no readings from the outside?

Based on a different, but similar, LaCrosse model (the WS-8611), it would appear to be an OverFlow indication, meaning that it's out of range. Here's a quote from that unit's manual:

Temperature measuring range:
Indoor : 14.2F to +139.8F with 0.2F resolution
(-9.9C to +59.9C with 0.1C resolution)
("OF.L" displayed if outside this range)
Outdoor : -39.8F to +139.8F with 0.2F resolution
(-39.9C to +59.9C with 0.1C resolution
("OF.L" displayed if outside this range)

It is likely that their convention remains the same across models, but I don't work for them, so I can't guarantee it.

Sep 25, 2014 | La Crosse LaCrosse Technology Weather...

1 Answer

My remote sensor Tx14TH-LCD-B started flashing several days ago and I have gone thru the factory reset new batteries and decided to buy a new sensor then discovered they have been discontinued along with...

I assume you have tried removing the batteries at both ends, reinstalling batteries at the sensor end then the indoor end, waiting without touching anything until the outdoor temp registers and heaving a sigh of relief as things are back to normal. I also assume since the word atomic is in the header that you have an atomic clock function. If nothing works or doesn't work right you probably need to replace the system.

I have a much simpler LaCrosse system which, at this moment, is showing an outside temp of 56 degrees BUT the clock doesn't work and failed early on. I share your frustration.

Nov 04, 2013 | La Crosse Technology La Crosse S98642...

1 Answer

How to change from "C" to "F" for the outdoor temperature

Go back and repeat the setup routine. Selecting C or F is part of that routine

Aug 04, 2013 | La Crosse LaCrosse Technology Weather...

1 Answer

My temp only reads LL.L and will not show the temp

Please look here:

Jan 23, 2013 | La Crosse Technology WT 8005U W Atomic...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18402 Answers


Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

56006 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides