Question about Black & Decker Garden
I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.
Posted on Nov 28, 2008
It depends on the planer blade set that you are using. If you are using the the 2 sided blades there is a guage that goes with it to set the blade depth before installing. I would strongly recommend that you go to Makitatools.com and type in your model number and download a copy of the owners manual for specific instructions. Let me know if you have any problems finding them
Posted on Mar 09, 2009
Go to this link and at the bottom center of the page insert your model number. You will be able to download the manual for that machine.
If your question has been answered, or I fixed your problem, please take just a moment to rate this post...thanks!!
Posted on Mar 31, 2009
Go to Dewaltservicenet.com and in the middle of the page at the bottom find the looking for manual box type in your model number and on the next page click on the instruction manual section for this tool, it is 4 pages long but it does reference removal and installation of the blade. If I have answered your problem would you please rate my response accordingly and thank you.
Posted on May 18, 2009
SOURCE: PHS550B saw blade change
MOST TIMES THERE IS A ARBOR LOCKING BUTTON ON THE HOUSING NEXT TO THE BLADE HOUSING.YOU HAVE TO HOLD THIS DOWN WHILE TURNING THE BLADE SECURING NUT TO LOOSEN OR TIGHTEN THE BLADE,OR YOU CAN DO IT THE OLDFASHONED WAY FIND A VENT HOLE IN THE BLADE,STICK A SCREWDRIVER IN IT LOCK THE SCREWDRIVER IN PLACE THEN TURN THE NUT(WHILE UNPLUGED OF COURSE)HOPE THIS HELPED
Posted on May 23, 2009
Tips for a great answer:
Aug 06, 2018 | Blade Saws
Aug 02, 2012 | Tools & Hardware - Others
Oct 27, 2010 | Black & Decker 2 pc. Planer Replacement...
Oct 05, 2010 | Black & Decker Garden
Jun 17, 2010 | Black & Decker 2 pc. Planer Replacement...
Jun 14, 2010 | Black & Decker Tools & Hardware - Others
Nov 13, 2008 | Dewalt DW735R Reconditioned Heavy Duty 13"...
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: