I need help connecting sony dvp ns 300 to a jvc tv. I can't watch dvd at all, confused about the wiring where does it go?

The CD/DVD player has three output ports:
(i) Line out Video used to connect the yellow pin of composite cable.
(ii) S-video out use d to connect an S-video cable.
(iii) Component video out (red, blue, green) used to connect a component video cable.

So, in order to connect the CD/DVD player to the TV, the TV should have either of the corresponding input port on it.

However, the video quality transmitted by component video cable will be the best among the three.

So, you may connect the TV and the CD/DVD player using an appropriate cable.

All the above connections require an additional audio cable to transmit audio from the CD/DVD player to the TV.
In this case, you may use an RCA (red and white) audio cable to connect the "R and L" audio out port on the CD/DVD player to the corresponding "R and L" audio in port on the TV.

Performing all the above steps will help you get the DVD player work with the TV.



wish u good luck!!!!!!!!!!