Question about Audio Players & Recorders

Open Question

Can a wireless speaker be connected to Emerson model number LF320EM4A

Posted by roy stone on

Ad

1 Related Answer

gopakumarg43

The Knight

  • 76416 Answers

SOURCE: I have a Emerson LED 32 LF320EM4A has sound no picture

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on Oct 01, 2016

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Volume control on Emerson model lf320em4a returns to 0 when button is released


Be certain that (G) is not stuck in down position.

I use Contact Cleaner by WD40, but you may have a different favorite spray
0remote-ptlunqq2za245sbpjuvbxiso-3-0.jpg

Aug 20, 2018 | Emerson Televison & Video

1 Answer

I have an Emerson tv 32in model no. Lf320em4a it’s about 3yrs old it won’t turn on the screen starts and shows the Emerson name then shuts off.is there a fuse or etc or is it just shot


Check your voltages when you power it on compared to when it shuts down...see what rail is dropping off for starters, then I can give you more of an idea where the issues are at..I have a feeling you have inverter issues because this was a common failure on this set check and see what voltages drop off after the startup screen

Apr 03, 2018 | Emerson Televison & Video

1 Answer

I Have A Emerson Lf320em4A Replaced The inverter Board With A New One. No Now Display?


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Mar 09, 2017 | Emerson Televison & Video

2 Answers

Television


I don't believe so, here is the Emerson site with the specs and features: http://www.emersonaudiovideo.com/product/product.php?id=649

Jan 18, 2017 | Emerson Televison & Video

1 Answer

I have a Emerson LED 32 LF320EM4A has sound no picture


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Oct 01, 2016 | Emerson 32-inch 720p LED TV Refurbished

1 Answer

I replaced the main board on a Emerson model LF320EM4A TV & still no picture ? There is only one board and tv repair man said it needed to be replaced. Still no picture?????


Put a flashlight to it and see if there is a picture. If so the back light has gone out. If not then the lcd must be out if there aren't any other boards.

Jul 27, 2016 | Emerson Televison & Video

2 Answers

Connect a CD player to LF320EM4A


Hi, plug red and white rca connectors from cd player to audio in - rear of tv.

Feb 02, 2015 | Emerson Televison & Video

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...