Washing machine will not aggitate.

All front loading washers will fill and drain multiple times before it finishes. Unlike a top loader, a front loading washer will take longer to run because there is no agitator and will fill with water and drain multiple times. A front loader is more energy efficient than a Traditional top loading washing machine. A washer dryer combo will take hours to complete a cycle.

hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Sounds like inlet solenoid valve fault

Sounds like a stopped up drain Pump.

check to see when and where you are to add the softener read the manual for tips look in the trouble shooting guide

no esprime

My whirlpool heavy duty 2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin

You need to check the lid switch for continuity. A bad lid switch will prevent this machine from agitating or spinning.

Check to make sure your lid switch is working.