Web master on my computer days denied access to this site but when at work. Site works. Not sute what setting it id to fix it

What web site?

You need to access the Setup page of Dlink DIR 300 wireless router:
1. Use a working computer that is hard wired to the router.
2. Open a Web Browser (IE, Firefox etc.) on the computer.
3. In the address bar of the browser type http://192.168.0.1 and press Enter.
4. When the login window appears, set the user name to admin and leave the password box empty. Click OK to continue.
(Note: If you setup your own Usename and Password on your router please use those info to login instead of using the default)
You will then see the Setup page of the router.
5. CLick on the ADVANCED tab.
6. On the left side of the screen Click on Parental Control.
7. On the "Configure Parental Control below: " select the option "Turn Parental Control ON and DENY computers access to ONLY these sites".
8. ON the "Website URL" tyoe in the website that you want to block
9. Click on the Save settings button.

Once completed then the sites you entered are completely denied and blocked on your router.

To resolve this problem, follow these steps.

1. Using the Internet Service Manager (Microsoft Management Console), open the Internet Information Server (IIS) snap-in and select the Web site reporting the 403.6 error. Right-click the Web site, virtual directory, or file where the error is occurring. Click Properties to display the property sheet for that item.
2. Select the appropriate Directory Security or File Security property page. Under IP Address and Domain Name Restrictions, click Edit.
3. In the IP Address and Domain Name Restrictions dialog box, if the Denied Access option is selected, then add the IP address, network ID, or domain of the computer that requires access to the exceptions list.
   
   In the IP Address and Domain Name Restrictions dialog box, if the Granted Access option is selected, then remove the IP address, network ID, or domain of the computer that requires access to the exceptions list.

Time to untinker! Should have left well enough alone!

Sir, you can use proxy sites to access the required sites, try : accessanywebsite.com

Hello,

You will need to wait until your site is approved by google and then you will get ads sent to your site.

Kind regards

JN763. Access rejected from your IP address

Your Web server thinks that the HTTP data stream sent by the client (e.g. your Web browser or our CheckUpDown robot) was correct, but access to the URL resource requires user authentication which 1) has not yet been provided or 2) which has been provided but failed authorization tests. This is commonly known as "HTTP Basic Authentication". The actual authentication request expected from the client is defined in the HTTP protocol as the WWW-Authenticate header field.
Generally this error message means you need to log on (enter a valid user ID and password) somewhere first. If you have just entered these and then immediately see a 401 error, it means that one or both of your user ID and password were invalid for whatever reason (entered incorrectly, user ID suspended etc.).
401 errors in the HTTP cycle
Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle:
Obtain an IP address from the IP name of your site (your site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
Open an IP socket connection to that IP address.
Write an HTTP data stream through that socket.
Receive an HTTP data stream back from your Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receives an HTTP status code it recognises as '401'.
Fixing 401 errors - general
Each Web Server manages user authentication in its own way. A security officer (e.g. a Web Master) at the site typically decides which users are allowed to access the URL. This person then uses Web server software to set up those users and their passwords. So if you need to access the URL (or you forgot your user ID or password), only the security officer at that site can help you. Refer any security issues direct to them.
If you think that the URL Web page *should* be accessible to all and sundry on the Internet, then a 401 message indicates a deeper problem. The first thing you can do is check your URL via a Web browser. This browser should be running on a computer to which you have never previously identified yourself in any way, and you should avoid authentication (passwords etc.) that you have used previously. Ideally all this should be done over a completely different Internet connection to any you have used before (e.g. a different ISP dial-up connection). In short, you are trying to get the same behaviour a total stranger would get if they surfed the Internet to your Web page.
If this type of browser check indicates no authority problems, then it is possible that your Web server (or surrounding systems) have been configured to disallow certain patterns of HTTP traffic. In other words, HTTP communication from a well-known Web browser is allowed, but automated communication from other systems is rejected with an 401 error code. This is unusual, but may indicate a very defensive security policy around your Web server.
Fixing 401 errors - CheckUpDown
When you set up your CheckUpDown account, you may optionally provide two items 2. Web Site User ID and 3. Web Site Password. You should provide these only if your site uses HTTP Basic Authentication. If you provide them, the CheckUpDown robot always uses them. This will result in a 401 error if in fact your site does not use this authentication. Conversely, if you do not provide them and your site does use this authentication, you also get a 401 error.
If however your URL is open to all comers, then an 401 message should not appear. Because it indicates a fundamental authority problem, we can only resolve this by negotiation with the personnel responsible for security on and around your Web site. These discussions unfortunately may take some time, but can often be amicably resolved.
Alternatively or the other way around is :

open the XP hosts file, and do a manual insert there.
The hosts file is located at: C:\WINDOWS\system32\drivers\etc
The entry is: 192.168.0.1 www.routerlogin.net
You might need to flush your DNS records at this point, or simply restart your computer.
And then use the following URL to access the admin page:
http://www.routerlogin.net/setup.cgi?next_file=start.htm
***Here is another solution to the problem, which is a fairly straight-forward way to disable the annoying wizard.
Type in your browser:
http://www.routerlogin.com/CA_HiddenPage.htm
Select: Disable Configuration Assistant, and click on Apply.
You can re-enable it by navigating to http://192.168.0.1/CA_HiddenPage.htm (where 192.168.0.1 is your router’s IP address)

I'm not sure if this is what you are referring to, but you can try adding it to your "safe sites" in Internet Explorer: http://www.microsoft.com/protect/computer/advanced/browsing.mspx

Add safe Web sites to trusted sitesDesignating a Web site as trusted allows the site to work correctly under the High security setting.
Microsoft strongly recommends that the first Web site you add to your trusted sites be Microsoft Update (http://update.microsoft.com/microsoftupdate/) so that you can continue to install important software updates directly from the Microsoft Update Web site.
To add a Web site to your list of trusted sites:
1.
On the Internet Explorer Tools menu, click Internet Options.
2.
In the Internet Options dialog box, click the Security tab.
3.
Click the Trusted sites icon, and then click the Sites button.
4.
In the Trusted sites dialog box, enter the Web site URL in the Add this Web site to the zone box, and then click Add.
The Trusted sites feature allows you to restrict trust to only sites that begin with https:. To include sites that begin with http:, including Microsoft Update, clear the Require server verification (https:) for all sites in this zone checkbox.

Trusted site added. We recommend that you make Microsoft Update the first site you add.
5.
Click OK.
6.
Under Security level for this zone, move the slider to Medium. This sets the security level for all of the sites that you trust to Medium. (If no slider is visible, click the Default Level button and then move the slider up to Medium.)

Thanks for choosing fixya.com

When a company has a Web monitoring server sites can only be accessed by having the administrator open up access to them. Even using a proxy would not work since traffic first goes through the monitoring server then out to the proxy.

If this is a site you need access to, I'd contact the admin and put in a request for access to the site.

Hope this helps.
Jei