I have the compustar 2w8000fmr(3000) and Its on that valet mode or whatever....I lock the truck and it auto unlocks it if I in range of truck.....HOW DO I TURN THIS OFF!?

https://help.compustar.com/s/article/How-Do-I-Exit-and-or-Enter-Valet-Mode

You can see this link.

notify manufacturer or manual for troubleshooting --check battery in fob -not in valet mode --any check engine codes

http://adamdorfman.com/compustar-2w8000fmr-3000-manual.pdf

Remote Programming Troubleshooting Guide - Compustar

https://support.compustar.com/.../202839770-Remote-Programming-Tro...

How do I add/remove a DroneMobile unit from my account? ... (Do not start the engine, simply move the key to the final position before start); Immediately following the key ... Holding the button down will cause the remote programming to fail.

How do I program a remote to a Compustar system ...

https://support.compustar.com/.../202232840-How-do-I-program-a-rem...

How do I add/remove a DroneMobile unit from my account? ... Insert your vehicle keyinto the ignition and cycle the key to the 'ON' position and back ... Valet mode will be activated if the system does not identify a remote during programming.

Programing a Compustar 1Way 4 Button Remote - YouTube

PRIME 9000 1-Mile Range, 2-Way Select - Compustar

www.compustar.com/product/prime-9000/

Compustar1-Mile Range, 2-Way Model: RF-2W9000-SS ... The classic Compustar look that made us the top remote start brand in North America. ... The screen keeps you updated on whether your doors are locked and in the event of an alarm trigger, the ...

Compustar RF-2W9000-SS remote kit failure? - 8th Generation Honda ...

www.8thcivic.com > ... > ICE, Electrical, Security, & Navigation

Jan 8, 2015 - 4 posts
I have had my Compustar RF-2W9000-SS remote kit and secondary remote ... on my 2008 Honda Civic SI Coupe, FG2, at a compustar authorized dealer. ... my remote was not responding to my car (the unlock/lock, autostart, ...

CompuSTAR Starters - TheCarSalon.com

www.thecarsalon.com/home/automotive/remote-starters/compustar/

Either tap buttons I and III or Lock and Trunk simultaneously on your remote. ... The introduction of the RF-2W9000-SS in 2010 ushered in a new generation of .

RF-2W9000-SS by Compustar from Remotely Started MN

remotelystartedmn.com/product-details.php?product-id=40

while in range of vehicle, press and hold lock and trunk at same time until you hear or see a confirmation on remote to exit valet mode or

To get the car out of valet mode all you need to do is put key in a door or the trunk and lock and unlock and that gets it out of valet mode. or hold the unlock or the lock button on the remote and that will get it out also.
The windows are working correctly, usually the auto window does not work after removing battery also, check yours, if you push the down button and release the window will go all the way down. if it does not then that will need to be programmed also.Let me know the out come good day.

You must put the alarm on a valet mode to see if the alarm is causing this problem
To enter or exit Valet Mode
1. Turn the ignition on
2. Turn the ignition off
3. Press and release the valet switch within 10 seconds
The status Led will light solidly if you are entering valet mode, and it will go out if you are exiting valet mode.
To enter or exit Valet Mode using the transmitter:
1. Open any vehicle door.
2. Press and realese lock and unlock buttons at the same time
3. Press and realese Aux button
4. Press and realese the lock and unlock button at the same time again
The status led will light solidly if you are entering Valet Mode and it will go out if you are exiting Valet Mode
Now when in Valet Mode try to start the engine, if the problem persist the alarm has nothing to do with it