My Frigidaire gallery is making small ice cubes that are about half the size of previously. We recently installed an osmosis system.

SOURCE: 550 Ice Maker Making Hollow cubes or Small Cubes

Hollow cubes are usually a result of lack of water supply

SOURCE: Frigidaire Gallery Series Side by Side doesn't crush ice

hi there,

could be that the ice maker arm is getting stuck or may have some frost on it. can you supply the complete model # please?

SOURCE: Ice maker is making hollow ice cubes, some only half frozen

Most ice makers have an adjustment screw to control the cube size. Its usually hidden behind a plastic panel on the front of the ice maker. A quarter turn either way and some trial and error testing should get you pointed in the right direction to your ideal ice cube.

SOURCE: ice maker only makes crushed ice

on the bottom of the bin there is a metal rod, this goes into the back wall where the solenoid is. find the square hole it goes into, pull down the white plastic piece with your index finger. you should here a clunk. now put the bin back and check to see if ok. if not you may need to replace the solenoid assy.

SOURCE: Frigidaire plhs267zab5 ice maker won't switch crush to cube

Pull out the whole ice machine part. At the back of the fridge you will see a small rectangle hole with a white plastic part inside the whole. Loosen the pastic part by applying a little pressure with your fingers it should move, it's probably just sticking.