Question about Ricoh Aficio MP 2000 Black and White Copier

1 Answer

Toner cartridge not loading

I recently installed a new cartridge in our Aficio 200 copier but the replace cartridge warning is still being displayed after every 2 or 3 copies. We have teken the cartridge out and reinstalled it several times, even have shaken the cartridge to loosen the toner. It goes fine for a few copies then the warning reappears.

Posted by lsnsmer on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Cheat the front door interlock and watch the toner bottle to see if it is turning. If not, could be a bad toner drive motor/drive assembly. Otherwise, remove and disassemble the toner hopper and clean it up. Make sure the four clear 'scooper' tabs are attached on the back of the receptacle that fits around the top of the toner bottle. Otherwise, just purchase a new toner hopper, they are cheap.

Posted on Sep 16, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DISPLAYING ADD TONER AFTER ADDING NEW TONER


Check your developing gear maybe one already worn out replace one set 5 pieces if not try re-install toner cartridge twice, check sp mode -toner drop or reset. hope this may help you.

Jun 19, 2015 | Ricoh Aficio 1013 All-In-One Laser Printer

1 Answer

Ricoh Aficio sp 5200DN printer has new cartridge toner but machine do not work & display shows replace cartridge (out of toner) how to solve this problem?


you had to go in sp mode to reset the new inserted cartridge.Have you try it before & if not the machine is in auto jammed mode due to no tone left....... sawadee kap

Sep 13, 2013 | Ricoh Aficio SP 5200DN - Printer - B/W -...

2 Answers

We have a Ricoh Aficio 350 copier that is quite old but has worked well through the years until now. It keeps displaying ADD TONER and runnng after we have already put in a new cartridge. Under add toner,...


take the toner supply unit out. toner supply unit is one where toner bottle fits and vacummed clean the unit. the toner unit is blocked. i am a Ricoh technician.

Sep 23, 2010 | Office Equipment & Supplies

1 Answer

Toner life end warning light. replaced with new toner/drum still error


To reset the sensor after installing a new toner cartridge follow these steps.
1. With unit powered on open the front cover.
2. Press the "Options" key. Display will show "Replace Drum?"
3. Press "Start" key.
4. Press "+" key 10 times until the display reads 10.
5. Press "SET" key.
6. Display will show "Accepted" for approximately 2 seconds. Then display will change to "Cover Open".
7. Close cover and see if Toner Life End error message has gone.

Jul 28, 2009 | Brother DCP-7020 Black and White Copier

2 Answers

Problem with aficio 1035


The developer should probably be changed in it. the cartridge should be inspected as well. Was there any toner spills?

Jun 21, 2008 | Ricoh Aficio 1035 Copier

1 Answer

Replacing toner


Check the developer.

Jun 17, 2008 | Ricoh Aficio 250 Copier

Not finding what you are looking for?
Ricoh Aficio MP 2000 Black and White Copier Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Bernard D'Souza

Level 2 Expert

164 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Cindy Wells

Level 3 Expert

6234 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...