Symbol barcode scanner N410 makes ringing noise and does not read barcodes.

The scan beam is fixed and can not be adjusted. However moving the n410 closer to the bar code will reduce the width of the beam itself. The narrow beam is designed to accommodate static stands as well as manual use.
Simply hold the n410 a few inches away from the bar code and the beam will be able to read the code underneath. No adjustment except the distance between the n410 and the barcode is required.

The Symbol N410 supports standard EAN/UPC 2d barcodes.

Increase the default time-out to 5 minutes by going to:
Control Panel > Power > Advanced
Select On Battery power: Turn off device if not used for 5 minutes.

If the scanner beeps just once after a scan, than he recognize the barcode and sends the data to the computer. If you dont receive any data, you are waiting for them on wrong interface. Data from USB or KeyboardWedge do come to Notepad/Word etc. The data from Serial RS232 Connection can you see only in Hyperterminal or similar application.

here is the Barcode Scanner Program right now, it seems like being able to scan barcode with Symbol Ls2208 handheld device.

if it is not workiing, go to this barcode website to find more compatible software for Ls2208, i am sure you will find the proper one.
NET Barcode Reader Barcode Reader ASP NET Barcode Reader VB NET Barcode... Barcode Components NET Barcode Generator Reader Java Barcode Generator...

If you have a model with Wireless functionality, can you use the Fusion application to manage your wireless connection. There should be an icon in the right corner.
You need to find out which authentication and encryption is used on the specific WLAN.
Then launch through clicking on the Fusion icon the Find WLANs dialog and follow the process of creating of new WLAN Profile.

settings

Lpzjor

Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Hello,
If you are willing to use VB.NET, then it will be easy. You would need the Symbol EMDK. With that and VS2008 (Express should be fine as well), you only need few coding steps:

1) Add reference to dlls
Symbol.dll and Symbol.Barcode.Dll

2) Finder a scanner
s = Symbol.Barcode.Device.AvailableDevices.First()

3) make a reader
r = New Symbol.Barcode.Reader(s)

4) add data
d = New Symbol.Barcode.ReaderData(1, 1024)

5) enable laser
r.Actions.Enable()

6) enable reading
r.Actions.Read(nrd)

7) add handler
AddHandler r.ReadNotify, AddressOf r_ReadNotify

8) read data in event
msgbox(d.Text)

That is all there is too it. Good day.

Does it beep each time you pull the trigger while the beem is on the barcode?