Question about The Health & Beauty

# My etekcity scale is showing a C shape on the screen after weighing something - what does that mean?

Posted by on

### jws1013

• Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

• The Master

A "C" will appear during the first weighing, this is a self-calibrating feature on some scales. It means the scale is re-calibrating to zero. Please re-weigh for accurate reading. Scale will also re-calibrate after every battery replacement.

Posted on Sep 22, 2019

### Anonymous

EACH BUTTON IS FOR FOUR INDIVIDUAL USER. BUTTON ALLOWS YOU TO INPUT IDEAL WEIGHT (FOUR GOAL WEIGHTS FOR FOUR INDIVIDUAL USERS). AND CALCULATE AGAINST ONE OF THE FOUR INDIVIDUAL ACTUAL WEGHTS. i AM USER 1 IN MY FAMILY. I HIT THE 1 BUTTON, WEIGHT AND MY GOAL WEIGHT COMES UP BEFORE MY ACTUAL.

Posted on Mar 08, 2009

### Anonymous

Hello,

I found this from another posting. Hope it helps.

FEMALES: age 20-29 normal= 6.2-7%
FEMALES: age 30-39 normal= 6-6.8%
FEMALES: age 40-49 normal= 5.6-6.4%
FEMALES: age 50-59 normal= 5.2-6%
FEMALES: age 60-69 normal= 4.9-5.7%
sorry no listings over age 69
My only thing now, is what it means if I am below the range.

Posted on Jan 13, 2010

### eldee

Take a 5 pound bag of sugar, flour or what have you. Put it on the scale. If it is off, turn the scale so that you can check every possible place for an adjustment. Adjust and go for it!!! Good luck...Lee

Posted on Jan 17, 2010

### Dazzy B

The zero capture is out of the 2percent tolerance so the cell is either faulty or requires zeroing. Open the unit and press the micros itch on the left of the board. The display flashes s. Press the zero key to change to flashing E. Press store to scroll to zero balance. Press semi auto tare. This captures zero without clearing the span calibration. The display will scroll around for a short period when complete press store.. Release the micro switch and scale will go thru warm up routine then display zero. Hope this helps, regs Darren.

Posted on Apr 15, 2012

### Tom Chichester

The LLL reading probably indicates a low battery.

Posted on Feb 06, 2015

×

my-video-file.mp4

×

## Related Questions:

### Y does my scale model # sw13 read LLL

That means that it is out of range. It is trying to weigh something that is too light. IT could be the sensor is bad or loose.

Oct 31, 2014 | Health & Beauty

### Escali scale wont turn on

Step on the scale and immediately step OFF and the scale will then be ready to weigh you. If this does not work, then you need to replace the battery.

Apr 05, 2013 | Escali BFBW200 Body Fat/Water Bath Scale

### How to fix an easy weigh digital scale

the 24c02 is a memory chip inside. Unless your a tech - you can't repair.

Jun 07, 2012 | DigiWeigh 100 X 0.01 Gram Digital Jewelry...

### My scale shows that i weigh about 30 pounds lighter than i do.

If this is showing your weight, how do you know how much you actually weigh?
Also, you should be testing on a flat, SOLID surface (bathroom tile works well).

Feb 28, 2011 | Conair Weight Watchers WW-87 Body Fat...

### Gives me diffrent weights even though I am weighing myself within seconds of time, and in the same spot on the floor.

I've found I have to weigh myself, step off, weigh myself with something in my something heavy in my hands, then weigh myself again. The 3rd weight you get will be your correct weight. If you needed the manual, I have uploaded in into photobucket...although it doesn't really address this issue.

http://s1125.photobucket.com/albums/l587/landofnarnia/Taylor%205568%20Scale/

Amy

Jan 07, 2011 | Taylor 5568 Fat Scale Stainless Steel ()

### When i try to weigh something on it it displays 'our2'. And does not work

OUR2 is probably OutZ or Out2, means you have to recalibrate your scale. Refer to your scales manual for instructions on recalibrating, usually you have to turn on your scale, press CAL button, wait till it displays for example 100g, depending on how much your scale can weight, then put that weight, for example 100g on your scale (you can use coins if you don,t have anything else, though be precise as coins can weigh more or less,informationon coins weight can be found in your country national bank site. After you put the weight, it should display OK or PASS, if it's FAIL or the scale turns itself off, it's either broken or the weight is not correct

May 16, 2010 | Microwave Ovens

### Scales not working properly- weighing too light with battery symbol dotting across screen - have changed the battery, no difference.

scale may need to be calibrated or you may have something causing the scale to be unstable or something could be binding

Mar 08, 2010 | Taylor Health & Beauty

### New Scale out of box will not weigh correctly

Take a 5 pound bag of sugar, flour or what have you. Put it on the scale. If it is off, turn the scale so that you can check every possible place for an adjustment. Adjust and go for it!!! Good luck...Lee

Jan 16, 2010 | Jobar International Idea Works Wireless...

### I need a manual for a Berkley fs50 scale

Operating Instructions1

A. Powering-on the scale
1. Press and hold the POWER button for two seconds. Scale will perform a self-test by displaying four 8s for three seconds. When "0.00 kg" or "0 lb 0 oz" is displayed on the screen, scale is zeroed-out and ready for normal operation.
B. Normal Weighing
1. Hang fish on the attached hook. Weight is displayed in either kilograms or pounds and ounces.
C. Switching between unit weights
1. Press and hold the POWER and CHOOSE button simultaneously for three seconds. Unit will change from weighing pounds and ounces to kilograms and vice versa.
D. Taring Weights
1. Weigh a bag or container till its weight is steadily displayed on the screen.
2. Press the POWER button once. Scale will zero-out and show "0.00 kg" or "0 lb 0 oz" and is ready for weighing multiple fish together.
E. Holding a weight
1. With the weight displayed on the screen, press the CHOOSE button. This will hold the current weight and is indicated by displaying an H to the left of the screen. To unlock the hold, simply press the POWER button.
F. Storing weights into memory
1. With a weight in the hold mode and an H displayed to the left of the screen, enter the memory mode by pressing the CHOOSE button. While in the memory mode, pressing the CHOOSE button will allow you to navigate through ten stored memories. These are indicated on the left and numbered 0 through 9. There are also 4 letters that indicate other options. An A shows the average of all stored weights. An E displays the total and a C resets the memory.
2. To store a weight, simply hold down the CHOOSE button for three seconds. Weights will automatically store into one of the number registers. To see the numbers with their weights, simply scroll through the numbers by pressing the CHOOSE button as described above.
G. Resetting the memory
1. With the unit in the C mode, press and hold the CHOOSE button for six seconds and scale will reset memory and zero out. Press the POWER button and scale is ready to begin weighing again.
H. Powering-off manually
1. Press and hold the POWER button for 6 seconds.

Dec 09, 2009 | Berkley Twist Lock Rod Rack

## Open Questions:

#### Related Topics:

109 people viewed this question

Level 2 Expert

Level 2 Expert