Toshiba studio 2506 firmware update after error code c260 how to solve

SOURCE: F103 ERROR CODE IN TOSHIBA E-STUDIO 282

F103 indicates HDD transfer time-out.
U can try format the HDD (08-690).
Then u perform the bad sector check (08-694). *take long time
If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.


* replacement of HDD require firmware update

Posted on Jul 02, 2009

Zaheer Ahmed

• 347 Answers

SOURCE: firmware for e-studio 282

I need firmware becuas the machine in errer f 103 i chage the HDD
than HDD need the softwer Pleas Give me a free softwe side

Posted on Jul 06, 2009

Edwin Martens

• 1110 Answers

SOURCE: What is error code C260? Fixable?

OK first of all the C260 code indicates a scanner lamp issue which is not major. But...Be VERY careful here as I need to know what you mean by "damaged"
I ask this because this being a full color copier you can run into so much money so fast it will make your head spin. They are complicated machines and you can run into a lot of issues.
Was the machine dropped? What were the circumstances that caused the machine to become damaged.
Since you are purchasing it damaged I would not even think of paying more than $200 to $300 as that is about what it is worth at the maximum.
I've got one in perfect condition with only 16,000 color copies on it that I can not even get $1,000 out of locally.

Posted on May 12, 2010

Muntejaya Ginting

• 10422 Answers

SOURCE: I need a software of Toshiba estudio352 Firmware

Just download the driver here:
www.driverfiles.net/.../Toshiba/.../download/page,sh,19807,221,12,.html

Posted on Jan 13, 2011

SOURCE: My toshiba e-studio 282 displayed error C260 How

first off try firmware if that does not work it could be the exposure lamp faulty or the slg board (board under the metal plate in the optics cavity) faulty ro the inverter is faulty. but also make sure that the white strip under the glass is clean

Posted on Mar 08, 2011