Question about Bosch Dishwashers

Open Question

Bosch SHY66C05UC /14, starts, pumps the water out, water flows in and then nothing

...it makes a sound as if something is coming on, but looks like nothing the agitator never comes on. I tried to run it in test mode and have Code 2 along with delay/start hour blinking. Note the dispenser has been broken for years so we jut put the soap pod in with the cover open. Any way to test if this is a circulation motor issue for sure?

Posted by Gary Singh on

Ad

5 Related Answers

robert samples

  • 1314 Answers

SOURCE: Dishwasher soap dispenser won't open during cycle

both have a wax motor on them that needs to be replaced you just remove the panel and replace the wax motor is what its called

Posted on Feb 16, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Soap dispenser still has the soap in it after the dishwasher cycle has ended...

do you have a salt unit fitted. I had the same problem and the repair guy had to replace the salt unit as it was blocked up. Failing that it might be the board not opening the solenoid to allow the water to be jetted through the soap dispenser.

Posted on Mar 16, 2008

Ad

Anonymous

  • 135 Answers

SOURCE: LG WM2277HS - water backing up into soap dispenser

The pipe from the soap dispenser to the tub is quite large, it seems as if the water isn't getting out of the dispenser quick enough. Pull the whole dispenser out of the machine. There is a release clip at the back of the cup with the tray fully open. Clean out all soap residue and scum. Sometimes there is also a spot or setting for liquid or powder detergent. Adjust accordingly. Reassemble and try it again.

Posted on Apr 08, 2008

Anonymous

  • 1 Answer

SOURCE: Bosch Dishwasher wont drain

Crazy! I have the EXACT same problem....sounds like it wants to drain...but won't ...Water has been stuck in the bottom for days now

Posted on Jul 18, 2009

bosch guru

  • 457 Answers

SOURCE: Bosch dishwasher soap dispenser

all you have to do is take a flathead screwdriver and look at the dispenser it has a locking metal around thecase where the dispenser goes. it a press in and listen to it click thats when you know that section is in.the plastic around the dispenser is the section where it snaps in. also unplug the dispenser. its only one plug in. very easy but atrick that i use is make sure the rubber gasket is lubricated with something like dish soap.when installing it you have to push hard and listen for the snaps .nyc appliance repair can handle at 1-888-692-1055 based in nyc

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SHY66C05UC/14 turns on but stops after 10-15 seconds, yet wash cycle button and time are still on. Replaced water flow part but no change. Suggestions?


Many Bosch dishwashers have a design flaw...the door will not fully close and pops out after you start it. When this happens the D/W will not run. You can go to the Bosch website to order the part to fix this and no they will not reimburse you nor acknowledge your email to customer service.

Sep 25, 2016 | Bosch Dishwashers

3 Answers

Bosch dishwasher starts, pumps, stops and says it's clean


Here is what I found that makes my bosch dishwasher come on. It has the same problems as the OP. I pick the cycle I want press start. The DW will sound like it's trying to drain. I let it run that cycle which takes about 30 seconds. It then starts another cycle that sounds different from the first and when it stops I turn the DW off and then back on, it resets and then it starts the wash cycle. I've done this twice and it has worked both times. I do not know what is causing this but it's better then what I had to do to get it to reset.

Apr 13, 2012 | Bosch SHE5AL06UC 24 in Builtin Dishwasher

2 Answers

A few days ago our sink/garbage disposal was plugged up - plunged it and opened drain BUT dishwasher started humming and wouldn't fill up with water. Bosch Model SHU43C06UC Tried pushing on/off...


Check the drain pump it is located in the front of you unit .Disconnect power or flip breaker .Remove the front kick plate then there is a metal plate above that is held on with 4 screws remove that and reach in and press lever on pump and turn counter clockwise it will come right out .Then check for items in the pump area could be glass. Hope it is helpfull

Sep 18, 2011 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

My Bosch Maxx 900 won't start has power, water and door locks. Light comes on for active mode but nothing happens


Sounds like you have a bad computer board. Is it flashing a error code? You will need a qualified service technician come look at it to find out if that is it could be something else but till you can see it in person and diagnose it with some stuff hard to tell but definitely sounds like the main board is bad and also make sure you let the technician know its a bosch allot of appliance tech's don't work on them Sears does though but there pricey but hope this helps and sorry for the trouble it giving you.

Jan 10, 2011 | Bosch Washing Machines

1 Answer

I have to drain my washing machine through a front hole drain opening in the bottom corner of machine. Water comes out, it has been left in machine. I drain my machine every six loads. WHY did Bosch design...


you have a blockage some where in the drain hose.most likely in the hose the comes form the bottom of the tub to the pump.you attach a wet dry shop vac to the end of the drain hose and remove the water this way while the vaccum is working look at the hose that comes form the tub to the pump and if it colapses then there is something restricting the water flow.also make sure to check in side the drain pump cover for any thing that is obstructing the pump

Feb 23, 2010 | Bosch Axxis WFL 2060 Front Load Washer

2 Answers

Hoover steam vac..F7452-900. not working in wash-auto rinse mode


This problem sound like you hav a problem with the pump. I would take it to a shop for service

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Sep 26, 2009 | Hoover F7452-900 SteamVac Upright Vacuum

1 Answer

Soap dispencer won' t dispence soap


My Bosch intergreted dishwasher is only 3 years old. For the past year, the dishwasher dispenser refuses to open on the second cycle. We have had the repair man here 3 times, and each time he says it's fixed,but it clearly is not. Does anyone know what to do about this??

Barbara Berger

Sep 30, 2008 | Bosch 24 in. SHY56A05 Stainless Steel...

1 Answer

No pressure during wash cycle


Motor pump has gone out. pump needs replacing. the unit needs to be pulled out inorder to access the pump. the sides of the d/w must come off.

Jun 09, 2008 | Dishwashers

3 Answers

Bosch Dishwasher wont drain


have you removed the filter? if it gets clogged the dishwasher wont drain. other wise is sounds like a faulty drain pump

Nov 17, 2007 | Bosch 24 in. SHY56A05 Stainless Steel...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...