At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Replace the oven temperature sensor. Unplug the range. Open the oven. The temp sensor will be in the top right or left of the oven.A short metal piece about half the size of a pencil. Remove the screws,pull it out carefully. Disconnect the wire plug. Reverse this order to install the new sensor.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To Set a Cook T ime: 1. On double oven models only, press UPPER OVEN or LOWER OVEN for the one you want to set. 2. Press BAKE or CONVECT UPPER (on some models). Press the number pads to enter a temperature other than the one displayed. 3. Press COOK TIME. 4. Press the HR and MIN "up" or "down" arrow pads to enter the length of time to cook. 5. Press START/ENTER. The start time and stop time countdown will appear on the oven display. On double oven models only, when both upper and lower ovens are being used at the same time, touch UPPER OVEN or LOWER OVEN to display the respective cook time. When the stop time is reached, the oven will shut off automatically and "End" will appear on the oven display. If enabled, end-of-cycle tones will sound, then reminder tones will sound every minute. Repeat the process by choosing the other option of UPPER or LOWER OVEN
Hi there I found this for you to read and hope this is helpful.Let me know how this goes.
F3 - E0
Oven temperature
sensor or oven temperature sensor fuse opened
Replace oven
temperature sensor or fuseThank you for writing to fix ya. Best Regards Richard
The F3 error code is usually for a bad oven temp sensor. You will need to disconnect the wiring harness for the temp sensor. Then take a reading with a ohm meter at both connections at sensor. You should get aroun 1100 ohms at room tempature. If the sensor is open(no complete signal) then it is bad and replace it. If the sensor tests good then it is a possible bad control board for range.
i think f3 error code has something to do with the temp probe maybe it is the problem. the temp probe is located if you open the door directly in the back wall. it looks like a prong. should read 1100ohms the f2 error code though usually has something to do with the keypad i would check all the connections maybe they are loose.
the temperature probr is located inside your oven in one of the upper corners. it should be a round stick looking piece. some are removed from the front others are removed from the back.
That error means the main control board has a internal failure. The board will have to replaced to fix that issue. If you need detailed repair help with that visit the link below: Appliance Repair Help With Live Chat
×