When i select camera,message displays:feature not supported".

open it camera & chack the camera connector jumping the point & wash ipa pcb cleaner.
after cleaning re solder the camera point.

click camera it shows feature not supported my mobile is 3230

This phone is also support .jar .jad .sis

Tray code 12345.But Its hardware problem,formatting will be useless.to fix it only change your camera modul or flexyble cable.100% works.I hope it help.

Your camera is damaged.repair or change camera from reparing shop..
Dont forget to rate

ur mobile softwares is corrupted... u had better to format it.

Your display circuit is broken, even if the LCD-panel,
seems to be ok the display is damaged.
This is a very common problem in Nokia phones.
The only way to fix this is to change the display.
You need a T-6 Torx Skrewdriver to do the job.
You can find displays for fair price at :
www.mytrendyphone.com
This is your solution! Please vote!

It may due to bad display........sometimes it happen when the mobile fall down..It works properly but camera and video may face problem..
Regards 
dilipbagdi MCP, MCDST, MCITP, MCTS

change memory card and try with a new memory card.

1) for the viberator check out the profile settings in profile>> selct te current profile>> viberator>>> off/on,,,,,if it is on than check out with vendor there is some problem with the viberator connecter to the main chip. 2)The camera problem is might be due to software problem ,,,, do upgrade the software again from the vendor.