Xerox Phaser 3100 Printer Error Fuser Temp.

try removing the fuser. restart the machine. place fuser back. If this doesn't work you'll need a new fuser. (Fuser is thing that get's warm on right side of the machine)

You can use this service manual to solve your problem

I have been struggling throughout the night to remove the Printing error Fuser temp following the suggested given but all were in vain. By accidently I managed to remover the error message by pressing # together* then switch on... super! vilho nhoni from Namibia

check the thermistor, thermostat and heat lamp in fuser

Disassemble fuser and check thermistor, thermostat and heat lamp.

Disassemble fuser and inspect thermistor and heat lamp. Then replace broken part.

SISODIYA COMPUTERS "I AM SOLVE THE PROBLEM FUSER TEMP ERROR "
BUTTON FAST PRESS STEP BY STEP
LET'S START
PREES- MENU BUTTON
* BUTTON(THIS IS STAR BUTTON)
# BUTTON
1 BUTTON
OK BUTTON
STOP BUTTON
MENU BUTTON
# BUTTON
^ BUTTON(THIS UP ARROW BUTTON)
OK BUTTON
YOU LAST BUTTON PRESS OK AND POWER "OFF" AND WAIT UNTIL 15 MINUTE AND PRINTER START PROMBLEM IS SOLVE FUSER TEMP

You will have to replace the fuser. Call 1-800-835-6100 and follow the prompts to purchase parts. It isnt real expensive. Just make sure you still don't have some warranty left on the parts.

xerox phaser 3100 mfp error HSYNC
What can i do to solve ?