Kenmore dryer model 110.62066102 electrical wiring diagram

http://www.searspartsdirect.com/partsdirect/user-manuals?sidPSx20071217x00001a&ibp-adgroupsearch_brand_manuals&ibp-keyword%2Bkenmore%20%2Bmanual&ibp-matchtypeb&gclid=CJrxyOv3wrwCFaxxOgodF24A2Q

http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Wall-oven-Parts/user-manuals/manual-downloads/Model-91141479791/0582/0125400?modelNumber=91141479791&diagramPageId=00006&documentId=10058590

Hello, this is Ava with Think Crucial.

You may find the User's Manual for your Kenmore model by clicking the link below.

https://www.searspartsdirect.com/partsdirect/user-manuals/11092826102-kenmore-parts-manual

You can purchase a wide variety of high quality appliances replacement parts direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/collections/appliances

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

The basic wiring, of the plug, is in the user manual, but I could not locate an actual total wiring diagram. In the user manual, at the end, is a list of addresses for the comany, that may be your best approach. Here is the website for the manuals if you have lost yours.
http://www.askousa.com/customer-care/technical_documentation/

Here you go, this is for both gas and electric units, since your unit is electric use the top diagram

Kenmore 6210 Dryer wiring diagram

Hope this helps, could use the model number thou,but usually the manufactor places a wiring diagram behind the panel for service technicians.

Diagrams are on the inside of the back panal, under the console or in a envelope glued to the front panal.
eric

The following link explains the proper wiring scheme for installing a 220VAC power cord to an appliance:

http://www.fixya.com/support/r793520-3_prong_4_prong_power_cord_conversion

Make sure you also have a dedicated outlet and power source for your dryer. This means a single outlet with a single circuit breaker. Most homes are constructed this way to ensure safe operation of the appliance and to prevent improper loading. If you have questions, please let me know.

As far as a wiring diagram is concerned, most manufacturers place a schematic drawing inside the operator console of the appliance for troublshooting purposes. I hope this helps.

The manufacturer normally places a wiring diagram inside the operator console. Remove the back panel and there should be a diagram taped inside. Some of these diagrams will show two circuits. One is for a gas dryer, and one is for an electric dryer. Make sure you reference the correct one. I hope this helps you. If you need further assistance please let me know.

I thinkl you can order the manuals from www.sears.com under the parts tab enter your model # also if it is an electric dry it is 220v with a neutral leg check with the local electrian to see if the power there is phased..Hope this helps
PS::The washer and the refrig will work on the tranformers