Question about Avery Office Equipment & Supplies
I have had this same problem trying to print DVD lable sheets.
I spent hours trying to work it out, HP support said it was the software(hmmm)
The answer to the problem is, the printer senses the printed block colour band on the preprinted lable sheet. I am using Fellowes - Neato DVD tempate sheets which have a black, block of colour on the leading edge, I'm not sure about Avery.
I found the quick fix is, turn the sheet around end for end against the manufacturers instructions. The opposite end is plain and goes through OK. You may have to calibrate the software to compensate if the printing starts in a different position this end, my sheets are the same within about 1mm.
You could also cut the block colour off the sheet if the direction was critical, and make allowance for the starting position.
I find the printer is good apart from this problem.
I hope this helps, it worked for me.
Posted on Mar 17, 2008
It worked fine for us on an Epson. We printed about 40 sheets fed one at a time. Do not stack the sheets in the feed hopper, they stick together because of the magnetism.
There is no template because the material is not die cut. It is just full 8.5x11" sheet size.
Posted on Dec 29, 2008
Have you tried this procedure?
You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer.
Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray.
2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.
3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes.
4 Leave the paper tray open while the envelopes are loaded.
If you have and it's not printing correctly, there is probably a problem with the document you're trying to print.
Posted on Feb 01, 2009
SOURCE: Paper size
Okay, go to your printer folder Start/Printers Right click on your printer (Officejet 6310) and click on Properties. You will see a button near the bottom called Printing Preferences. Here is where you choose your paper. You can make your choice here and choose to make it your default settings (click Apply to make the new paper your default to print your invitations...you will have to change back after). You may change the quality of print and paper type as well since the default setting won't provide the quality of print you desire. From here it's pretty straight forward. Feed your invitations into the paper tray as you would normal paper and try a test print for quality control. Once you've got the desired output, print the rest of your invitations.
Posted on Apr 20, 2009
If your using Windows system you need to go the control and then select printers icon in the control panel and right click on and select printing preferences and change the paper type or use the control on the printer to change the paper type...
Posted on Apr 30, 2009
Tips for a great answer:
Mar 15, 2016 | HP Officejet Pro 8600 Plus e-All-in-One -...
Aug 07, 2011 | Office Equipment & Supplies
May 23, 2011 | HP LaserJet M3035xs MFP All-In-One Printer
Feb 28, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...
Jan 05, 2010 | Office Equipment & Supplies
Sep 16, 2009 | Kodak EASYSHARE 5100 All-In-One Printer
Apr 22, 2008 | HP PSC 1210 All-In-One InkJet Printer
Apr 18, 2008 | Computers & Internet
Feb 04, 2008 | Avery DesignPro Deluxe CD-ROM...
Jun 21, 2017 | Avery Office Equipment & Supplies
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: