How to use Handheld Spiralizer? - Computers & Internet

In the market, you will get another type of pasta maker, and that is more like a veggie slicer or spiralizer. What they do is slice up the veggies into the cool and attractive size and shapes they create a good flavor to your pasta.Click the link for best pasta makers review.

On your handheld, launch the Prefs application. Under General, select Security.

If the Password box says "Unassigned," tap the box and create a password for your handheld.

Once the password has been set, remove the stylus. Disconnect your handheld from the AC charger, if connected.

On your handheld, hold down the Power button.

While holding down the Power button, use the stylus to press the RESET button on the back of your handheld.

1. While still holding the Power button, the screen will show the Palm logo and a progress bar. Then the circular Palm Powered logo will appear. Release the power button when you see the Palm Powered logo.
   
   
2. A message will appear warning that you are about to erase all the data stored on your smartphone. Press UP.
3. You'll see a series of Palm logo screens, then a prompt to tap onscreen targets. The Factory Reset is complete

Factory setting nothing but wipeing the Handheld, If you want to wipe the Handheld follow the steps:
1) Go to Options.
2) Select Security option.
3) Select General settings.
4) Press the menu key, you will get the option for wipe Handheld, once you wipe the Handheld your Handheld will go back to Factory setting, No data will be available in the Handheld.
Thank you for using Fixya.

Hello.

From Palm support:

1. Press either the Date Book or Address Book button to see if
you can turn on your handheld that way.
2. Perform a soft reset: Use the tip of an unfolded paper clip
(or similar object without a sharp tip) to gently press the
reset button inside the hole on the back panel of your
handheld.
3. Make sure the power adapter is plugged securely into a
working electric outlet and is firmly connected to the
handheld. (If no outlet is available, your handheld can also
be charged through the USB cable, but this takes much
longer.)
Note: Your handheld does not have an indicator light to indicate that your handheld is being charged.
4. Charge for another three full hours.
5. If your handheld now turns on, check the charging-battery icon to ensure that your handheld is being charged. Example:
a. Connect the handheld to an outlet and turn it on.
b. Tap Home .
c. Look for the lightning bolt on the battery icon at the top of the screen.
d. If you do not see the lightning bolt, repeat steps 3 and 4.

Hope this helps.

Get a fresh copy of HotSync software at http://palmone.r3h.net/downloads.palm.com/PalmDesktopWin62.exe
After new installation create a new profile
When it sync it will from handheld to the computer.
Good Luck

it will reset every time you restart

the only thing that you can do for this error message is to reload the operating system on the blackberry. You have to have the blackberry desktop manager installed on your computer first. Once the program is installed then perform the following

To run Application Loader on your computer, follow these steps:

1. Connect the handheld to the computer (insert the handheld in the cradle or connect directly by USB cable).
   • Note: The handheld must remain connected throughout the entire process or the handheld’s applications may not work properly. If a password is enabled, it must be entered before the handheld connects to a computer. See Password not accepted when connected to the BlackBerry Desktop Manager.
2. Open the BlackBerry Desktop Manager.
   • Note: Click Start, Programs, BlackBerry, Desktop Manager.
3. Verify that a pop-up window appears when the handheld is recognized.
4. Click Application Loader if the pop-up window does not appear.
5. Click Update Now.
   • Note: (This option only appears if new device software is available).
     
     
     
6. Click Next to open the 'Handheld Application Selection' window.
   • Each application lists (along with its file size) with a check box and an 'Action' item.
7. Review the following information about items that appear in the 'Action' column:
   • Install: Appears when an application is not present on the handheld.
     • The application loads on the handheld.
   • Update: Appears when the application version on the handheld is older than the version available with the Application Loader tool.
     • The most recent version of the application loads on the handheld.
   • None: Appears when the application version on the handheld is the same as the version available with the Application Loader tool.
     • The application does not change on the handheld.
   • Downgrade: Appears when the application version on the handheld is more recent than the version available with the Application Loader tool.
     • The older version of the application loads on the handheld.
   • Remove: Appears when a check box is cleared beside an application and that application was already present on the handheld.
     • The application is removed from the handheld.
   • Note: For more information on a particular application, select the application, then click Details. The handheld’s standard system software is also listed in the 'Handheld Application Selection' window. The software must be loaded on the handheld. The check box cannot be cleared.
     
     
     
8. Click Next.< been have selections all>
   • The 'Application Data Backup' window appears.
9. Verify that the first option is selected by default.
   • Note: This option automatically backs up handheld applications and data. Data restores after the handheld software reloads.
     
     
     
10. Click Next.
    • Note: For troubleshooting BlackBerry handheld issues, it is recommended to reload the application without restoring the user data.
11. Click Finish when asummary window appears.
    • The actions that occur during the loading process appear.
12. Verify that the handheld resets.
    • Note: This process may take a few minutes.
13. Click Close to return to the Desktop Manager.
14. Verify that the Application Loader indicates whether or not the process is successful.
    • Note: If the loading process is not successful, verify that the handheld is connected to computer properly. Repeat the above procedure if there was a connection error.

Is KsDatebook compatible with Palm? Palm suggests only two programs to sync calender files with Microsoft Outlook and the one that comes with the TX CD.

yes it is. if you have the installations cd for you zire handheld and the installation cd for your palm z22 handheld and have already installed them on one computer then you can just go up to the file tab on the top, click on it, and got to export, then choose what you want to go on to the new handheld and just click export the palm z22.

I think the computer overwrites the handheld. You could avoid this by following this steps:
- right click hotsync icon on Windows system tray
- choose "custom"
- double-click the application you need to change
- and change it to "handheld overwrites desktop"

Just that simple :)