Question about American Standard Home
Sometimes theres caps on top pop the cap and tighten the screws and sometimes there are nut or wing nuts on the bottom...simple enough for you?
Posted on Sep 06, 2019
Seat the tank well on a new wax ring and then tightnen the two bolts on the sides evenly there is a small amount of pressure but thats it. To much and you'll snap the side of the bowl. You can caulk around the edge if you want more security,less movement.
The tension on the nuts is very tricky just a feel kinda thing.
Be carefull not to over do it.
Posted on Sep 04, 2009
SOURCE: loose Toto toilet seat
Lift up plastic caps located on ends of hindge behind seat. use flat screw driver and hold the nut under the outside toilet rim with your fingers or a pair of pliers. Do not over tighten or might crack the bowl.
Posted on Sep 14, 2009
You can order from the American Standard website:
You can also search for a retailer/distributor near you who will probably carry replacement parts. See here:
Posted on Jan 26, 2011
Places like these are your only hope.
Posted on Mar 06, 2011
Tips for a great answer:
Aug 02, 2014 | American Standard Cadet 3 Right Height...
Oct 24, 2013 | American Standard Church Seats EL270...
Sep 26, 2013 | American Standard Church Seats EL270...
Jul 20, 2011 | American Standard Church Seats EL270...
Mar 15, 2011 | American Standard Williamsburg Toilet Seat...
Mar 06, 2011 | American Standard Church Seats EL270...
Jan 16, 2011 | American Standard Home
Jan 06, 2009 | Home
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: