How do I get manual for singer sewing machine 4411

The Singer 4411 has a hidden switch to raise and lower the feed dogs. It's on the back of the machine near the presser foot. You have to remove (slide to the left, from the front of the machine) the extension table/accessory box to access the switch. Move the switch away from the body of the machine to raise the presser foot. See page 24 of the manual for the picture.

The manual is available on the product page: https://www.singer.com/heavy-duty-4411-sewing-machine. The current link to the manual is https://manuals.singer.com/Manuals/RetrievePDF/608 .

I hope this helps.

Cindy Wells

Do you mean the Singer 4411 Heavy Duty sewing machine? If so,
first place the spool on the spool pin with an appropriate sized spool holder, if you are starting the project. Snap the thread into the thread guide to the left of the of the spool pin. Wrap the thread clockwise around the bobbin winder tension discs (slightly to the left and forward of the thread guide). Bring thread towards the bobbin spindle. Thread the bobbin (put the thread through the hole in the bobbin). Place the bobbin on the spindle with the hole up. Move the bobbin spindle to the right. Hold onto the thread above the bobbin and step on the foot control pedal. When the bobbin finishes winding the thread, cut the thread at the top of the bobbin and the incoming thread from the spool. Move the bobbin spindle to the left and remove the bobbin. If you have already threaded the machine for sewing, you will need to remove it from the various guides and tension discs that are used in sewing. Then after winding the bobbin, re-thread the top thread.

The directions to wind the bobbin are in the manual on page 12 (page 19 of the PDF). You can find many Singer manuals at the Singer support page: https://www.singer.com/support . The 4411 support page is https://www.singer.com/search/support?lp=support&title=4411 . The current link to the manual is https://www.singer.com/sites/default/files/product_manual/SINGER%204411%20Heavy%20Duty%20Sewing%20Machine.pdf .

I hope this helps.

Cindy Wells

Sounds more like a lack of lubrication. I suggest you check your instruction manual for maintenance tips.

ring a sewing machine shop and as the technician

According to Singer Sewing Machine Manual, it will not fit.

you oil it in the center of your bobbin case, also theres a small pad like thing just above your needle , there as well as inside your threading area where the spring is

You may have a timing issue with your sewing machine.

Hai, I think your machine time is changing. So you can't remove the bobbin case. Please go to mechanic shop. First time you look and see. Next time you can try.

here is a free manual is if the information is in the manual
http://www.singerco.com/uploads/download/1230_4411_heavy_duty_esf.pdf

If you've threaded the bobbin per instructions... then make sure your needle isn't damaged, bent, or dull. Also make sure the needle is seated fully and correctly oriented into the needle bar.